On 11/22/2016 02:06 AM, Krzysztof Kozlowski wrote:
> On Mon, Nov 21, 2016 at 04:10:32PM +0900, Jaehoon Chung wrote:
>> Odroid-xu3/4 didn't need to use the cd-gpios for detecting card.
>> Because Host controller has the CDETECT register through SDx_CDN line.
>> Host controller can know whether card is inserted or not with this
>> register.
>>
>> When i have checked the Odroid-xu3/4, they are using CDETECT register.
>> (Not using exteranl cd-gpio.)
>
> Makes sense. Just one question: the sd0_cd pinctrl setting should stay,
> right?
Right, It needs to use SD0_CD function.
I have tested on Odroid-XU3/XU4.
Tested with the below cases.
1) On boot with SD-card (without eMMC)
- Inserted eMMC : Detected
- Removed eMMC : Detected
2) On boot with Sd-card (with eMMC)
- Detected
3) On boot with eMMC
- Detected
Best Regards,
Jaehoon Chung
>
> Best regards,
> Krzysztof
>
>> Fixes: fb1aeedb61ad ("ARM: dts: add mmc detect gpio for exynos5422-odroidxu3")
>> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 1 -
>> 1 file changed, 1 deletion(-)
>>
>> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> index 9e63328..05b9afdd 100644
>> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
>> @@ -510,7 +510,6 @@
>> &mmc_0 {
>> status = "okay";
>> mmc-pwrseq = <&emmc_pwrseq>;
>> - cd-gpios = <&gpc0 2 GPIO_ACTIVE_LOW>;
>> card-detect-delay = <200>;
>> samsung,dw-mshc-ciu-div = <3>;
>> samsung,dw-mshc-sdr-timing = <0 4>;
>> --
>> 2.10.1
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
