Hi Rob > These are v4 of OF graph base simple-card patch-set. > v3 patch had ALSA SoC side prepare patches as [1/xx] - [5/xx], > but these are already accepted by Mark, thus, this v4 doesn't > include these. > Mainly, v4 solved non-OF case compile error which was reported > by kbuild. About "type" property on OF graph DT, your opinion was that it is not needed, and HDMI driver can handle it. But I noticed that it doesn't work for HDMI sound side. Below case, port 0 to 3 is for HDMI video out, and port 4 - 5 are for HDMI sound. This is located in HDMI video out DT, so, port 0 - 3 can be handled by HDMI video driver. but port 4 - 5 will be handled by HDMI sound driver which is very generic driver, and it references this port. In ALSA side, in this case HDMI sound is handled as 1st and 2nd DAI. This means, port4 should 1st, port5 should be 2nd in ALSA. it is impossible to handle it without "type" property. ports { #address-cells = <1>; #size-cells = <0>; port@0 { reg = <0>; du_out_rgb: endpoint { }; }; port@1 { reg = <1>; du_out_hdmi0: endpoint { }; }; port@2 { reg = <2>; du_out_hdmi1: endpoint { }; }; port@3 { reg = <3>; du_out_lvds0: endpoint { }; }; port@4 { type = "sound"; du_out_hdmi_snd0: endpoint { }; }; port@5 { type = "sound"; du_out_hdmi_snd1: endpoint { }; }; }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html