On Fri, 2013-12-06 at 13:14 +0000, Mark Brown wrote:
> From: Mark Brown <broonie@xxxxxxxxxx>
>
> The clock-frequency property is meaningless for the models but it's a
> mandatory property so claim that all the cores run at 1MHz.
Is it a mandatory property? I know we seem to get ugly warnings if it's
missing but I see no mention of it at all in
Documentation/devicetree/bindings/arm/cpus.txt (am I looking in the
wrong place?)
I think this attribute got merged into the kernel with the early power
related scheduling efforts, but given the state of all that at the
moment I was guessing it might be obsolete.
-- Tixy
> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/foundation-v8.dts | 4 ++++
> arch/arm64/boot/dts/rtsm_ve-aemv8a.dts | 4 ++++
> 2 files changed, 8 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/foundation-v8.dts b/arch/arm64/boot/dts/foundation-v8.dts
> index 4a060906809d..f91b2fa41fb3 100644
> --- a/arch/arm64/boot/dts/foundation-v8.dts
> +++ b/arch/arm64/boot/dts/foundation-v8.dts
> @@ -34,6 +34,7 @@
> reg = <0x0 0x0>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> cpu@1 {
> device_type = "cpu";
> @@ -41,6 +42,7 @@
> reg = <0x0 0x1>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> cpu@2 {
> device_type = "cpu";
> @@ -48,6 +50,7 @@
> reg = <0x0 0x2>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> cpu@3 {
> device_type = "cpu";
> @@ -55,6 +58,7 @@
> reg = <0x0 0x3>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> };
>
> diff --git a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
> index 572005ea2217..d7debfe79d9f 100644
> --- a/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
> +++ b/arch/arm64/boot/dts/rtsm_ve-aemv8a.dts
> @@ -37,6 +37,7 @@
> reg = <0x0 0x0>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> cpu@1 {
> device_type = "cpu";
> @@ -44,6 +45,7 @@
> reg = <0x0 0x1>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> cpu@2 {
> device_type = "cpu";
> @@ -51,6 +53,7 @@
> reg = <0x0 0x2>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> cpu@3 {
> device_type = "cpu";
> @@ -58,6 +61,7 @@
> reg = <0x0 0x3>;
> enable-method = "spin-table";
> cpu-release-addr = <0x0 0x8000fff8>;
> + clock-frequency = <1000000>;
> };
> };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
