Re: [PATCH 2/2] Documentation: dt: Document TSC2005 DT binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Dec 09, 2013 at 09:46:38AM -0800, Tony Lindgren wrote:
> > +Optional properties:
> > + - ti,fuzz-x		      : integer, X noise value of the touchscreen
> > +				(defaults to 4)
> > + - ti,fuzz-y		      : integer, Y noise value of the touchscreen
> > +				(defaults to 8)
> > + - ti,fuzz-pressure	      : integer, pressure noise value of the touchscreen
> > +				(defaults to 2)
> > + - ti,max-x		      : integer, maximum reported x value
> > +				(defaults to 4096)
> > + - ti,max-y		      : integer, maximum reported y value
> > +				(defaults to 4096)
> > + - ti,max-pressure	      : integer, maximum reported pressure
> > +				(defaults to 4096)
> > + - ti,x-plate-resistance      : integer, resistance of the touchscreen's X plates
> > +				in ohm (defaults to 280)
> > + - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
> > +				the configured time (in milli seconds), the driver
> > +				will reset it. This is disabled by default.
> 
> Instead of adding these optional ti,* properties you can set them in the
> driver directly in the of_match table based on the compatible flag. Then
> you can pass compatible flag like ti,tsc2005-nokia-n900, or the name of
> the LCD panel. Most likely these depend on the LCD panel selected.

I could certainly do this, but it would move the board specific data
from the boardcode into the driver. That looks contra-productive to
me. Is there a good reason to do it this way?

-- Sebastian

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux