[PATCH] ARM: dts: sunxi: Explicitly enable pull-ups for MMC pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




In the past, all the MMC pins had

	allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

which was actually a no-op. We were relying on U-boot to set the bias
pull up for us. These properties were removed as part of the fix up to
actually support no bias on the pins. During the transition some boards
experienced regular MMC time-outs during normal operation, while others
completely failed to initialize the SD card.

Given that MMC starts in open-drain mode and the pull-ups are required,
it's best to enable it for all the pin settings.

Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
 arch/arm/boot/dts/sun4i-a10.dtsi     | 1 +
 arch/arm/boot/dts/sun5i.dtsi         | 1 +
 arch/arm/boot/dts/sun6i-a31.dtsi     | 4 ++++
 arch/arm/boot/dts/sun7i-a20.dtsi     | 2 ++
 arch/arm/boot/dts/sun8i-a23-a33.dtsi | 3 +++
 arch/arm/boot/dts/sun8i-a83t.dtsi    | 1 +
 arch/arm/boot/dts/sun8i-h3.dtsi      | 3 +++
 arch/arm/boot/dts/sun9i-a80.dtsi     | 3 +++
 8 files changed, 18 insertions(+)

diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index dae838e4dd9e..ba20b48c0702 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -1023,6 +1023,7 @@
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
index 7ab6b336533e..54170147040f 100644
--- a/arch/arm/boot/dts/sun5i.dtsi
+++ b/arch/arm/boot/dts/sun5i.dtsi
@@ -582,6 +582,7 @@
 				       "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_pins_a: mmc2@0 {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 7ea1116c7c88..20a0331ddfb5 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -547,6 +547,7 @@
 						 "PF3", "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc1_pins_a: mmc1@0 {
@@ -554,6 +555,7 @@
 						 "PG4", "PG5";
 				function = "mmc1";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_pins_a: mmc2@0 {
@@ -571,6 +573,7 @@
 						 "PC24";
 				function = "mmc2";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc3_8bit_emmc_pins: mmc3@1 {
@@ -580,6 +583,7 @@
 						 "PC24";
 				function = "mmc3";
 				drive-strength = <40>;
+				bias-pull-up;
 			};
 
 			uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 34d613b0dd73..a1ee4197129a 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -1179,6 +1179,7 @@
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
@@ -1200,6 +1201,7 @@
 				       "PI7", "PI8", "PI9";
 				function = "mmc3";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			ps20_pins_a: ps20@0 {
diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index ecb49a5a7615..bc3e936edfcf 100644
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -293,6 +293,7 @@
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc1_pins_a: mmc1@0 {
@@ -300,6 +301,7 @@
 				       "PG3", "PG4", "PG5";
 				function = "mmc1";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_8bit_pins: mmc2_8bit {
@@ -309,6 +311,7 @@
 				       "PC15", "PC16";
 				function = "mmc2";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			pwm0_pins: pwm0 {
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 656cdb5f7a88..79eaa7139f43 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -171,6 +171,7 @@
 				       "PF3", "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			uart0_pins_a: uart0@0 {
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index 416b825ddb9f..fca66bf2dec5 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -348,6 +348,7 @@
 				       "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc0_cd_pin: mmc0_cd_pin@0 {
@@ -361,6 +362,7 @@
 				       "PG4", "PG5";
 				function = "mmc1";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_8bit_pins: mmc2_8bit {
@@ -370,6 +372,7 @@
 				       "PC15", "PC16";
 				function = "mmc2";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			spi0_pins: spi0 {
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index b97db1df0803..7231d2c90dde 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -696,6 +696,7 @@
 				       "PF4", "PF5";
 				function = "mmc0";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc1_pins: mmc1 {
@@ -703,6 +704,7 @@
 						 "PG4", "PG5";
 				function = "mmc1";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			mmc2_8bit_pins: mmc2_8bit {
@@ -712,6 +714,7 @@
 				       "PC16";
 				function = "mmc2";
 				drive-strength = <30>;
+				bias-pull-up;
 			};
 
 			uart0_pins_a: uart0@0 {
-- 
2.10.2

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux