>From: Scott Wood
>On 11/15/2016 06:39 AM, Sriram Dash wrote:
>>> From: Scott Wood
>>> On 11/13/2016 11:27 PM, Sriram Dash wrote:
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt
>>>> b/Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt
>>>> new file mode 100644
>>>> index 0000000..d934c80
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/phy/phy-qoriq-usb3.txt
>>>> @@ -0,0 +1,36 @@
>>>> +Driver for Freescale USB 3.0 PHY
>>>> +
>>>> +Required properties:
>>>> +
>>>> +- compatible : fsl,qoriq-usb3-phy
>>>
>>
>> Hi Scott,
>>
>>> This is a very vague compatible. Are there versioning registers
>>> within this register block?
>>>
>>
>> There are versioning registers for the phy (1.0 and 1.1). But the
>> current erratum
>> A008751 does not require the mentioning of the version numbers. Was
>> planning to take care of the versioning when there is code diversity
>> on the basis of the version number.
>
>That is not how device tree bindings work. The describe the hardware, not the
>driver.
>
>That said, is the block version sufficient to tell whether a given chip has this
>erratum? If so, you don't need a special property for the erratum. If not, what is
>different about the PHY that is not described by the versioning?
>
>In any case, it would be nice to mention the version register and its offset in the
>binding, just so that it becomes part of the definition of this compatible string, and
>if we come out with some QorIQ chip with a
>USB3 PHY that is totally different and doesn't have that version register, it'll be
>clear that it needs a different compatible.
>
Okay. Will include version number in the next rev for Documentation and dt.
>>>> +static inline u32 qoriq_usb3_phy_readl(void __iomem *addr, u32
>>>> +offset) {
>>>> + return __raw_readl(addr + offset); }
>>>> +
>>>> +static inline void qoriq_usb3_phy_writel(void __iomem *addr, u32 offset,
>>>> + u32 data)
>>>> +{
>>>> + __raw_writel(data, addr + offset); }
>>>
>>> Why raw? Besides missing barriers, this will cause the accesses to
>>> be native-endian which is not correct.
>>>
>>
>> The only reason for __raw_writel is to make the code faster.
>
>Does that really matter here?
>
>> However, shall I use writel(with both barriers and byte swap) instead
>
>Yes, if the registers are little-endian on all chips.
>
The endianness is not same for all Socs. But for most Socs, it is big-endian.
Is "iowrite32be" better instead?
>> and then make appropriate changes in the value 32'h27672B2A?
>
>Not sure what you mean here.
>
>> In my knowledge, there are more than 5 errata in pipeline,
>
>Then please get all of these errata described in the device tree ASAP (unless their
>presence can be reliably inferred from the block version, as discussed above).
>
Yes. We will push the errata asap.
>> However, in future, if any other erratum comes up, and it has to be
>> applied at any point other than during init, then the variable has to
>> be added in qoriq_usb3_phy struct and the property has to be read separately.
>
>Or if the erratum is detected by some means other than a device tree property...
>
Yes. For any other case also, it will be handled differently.
>-Scott
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
