Re: [PATCH 1/2] usb: dwc2: add amcc,dwc-otg support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 11/14/2016 3:00 PM, John Youn wrote:
> On 11/11/2016 3:12 PM, Christian Lamparter wrote:
>> On Friday, November 11, 2016 2:20:42 PM CET John Youn wrote:
>>> On 11/11/2016 2:05 PM, Christian Lamparter wrote:
>>>> On Friday, November 11, 2016 1:22:16 PM CET John Youn wrote:
>>>>> On 11/11/2016 12:59 PM, Christian Lamparter wrote:
>>>>>> This patch adds support for the "amcc,usb-otg" device
>>>>>> which is found in the PowerPC Canyonlands' dts.
>>>>>>
>>>>>> The device definition was added by:
>>>>>> commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands board")'
>>>>>> but without any driver support as the dwc2 driver wasn't
>>>>>> available at that time.
>>>>>>
>>>>>> Note: The system can't use the generic "snps,dwc2" compatible
>>>>>> because of the special ahbcfg configuration. The default
>>>>>> GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
>>>>>> when the USB and SATA is used concurrently.
>>>>>
>>>>> I don't want to add any more of these param structures to the driver
>>>>> unless really necessary. We're trying to remove usage of them in favor
>>>>> of using auto-detected defaults and device properties to override
>>>>> them.
>>>> Ok, thanks. I think that would work. I've attached an updated patch.
>>>> Can it be applied/queued now? Or do you want me to resent it later?
>>>>
>>>>> The AHB Burst is actually one of the ones we were going to do next
>>>>> because our platform also doesn't work well with INCR4. In fact I'm
>>>>> thinking of making the default INCR.
>>>> Is that actually possible to change the default still? This would
>>>> require to re-evaluate all existing archs/platforms that use 
>>>> "snps,dwc2" for INCR16 compatibility. 
>>>
>>> INCR, not INCR16, but you're right, so we may not change it even
>>> though though INCR is usually the right choice over INCR4.
>> What about making a device-tree property?
> 
> Yes, that's what I meant. I'll send a change for this shortly.
> 
>>
>> Recommended properties:
>>  - g-ahb-bursts : specifies the ahb bursts length, should be one of
>>    "single", "INCRx", "INCR4", "INCR8", or "INCR16". If not specified
>>    the safer but inefficient "INCR4" is used. The optimal setting is
>>    "INCRx".
>>
>> Would this work? If so, I can make a patch over the weekend.
>>> Anyways, with the binding, can't you just set the compatible string to
>>> snps,dwc2?
>>
>> Ah, let me explain. I had a discussion with Mark Rutland and Rob Herring
>> a while back about device-tree bindings.
>>
>> They made it very clear to me, that they don't want any generic "catch all
>> compatible" strings:
>>
>> "Bindings should be for hardware (either specific device models, or for
>> classes), and not for Linux drivers. The latter is subject to arbitrary
>> changes while the former is not, as old hardware continues to exist and
>> does not change while drivers get completely reworked." [0]
>>
>> Furthermore, this is an existing binding in kernel's canyonlands.dts [1]
>> and this binding can't be easily changed. Rob Herring explained this in
>> the context of the "basic-mmio-gpio" patch [2] when I was editing the dts
>> to make them work with the changes I made:
>>
>> "You can't remove the old drivers as they are needed to work with 
>> old dtbs, so there is no gain.
>>
>> You would need to match on existing compatibles such as
>> moxa,moxart-gpio and provide a match data struct that has all the info
>> you are adding here (e.g. data register offset). Then additionally you
>> could add "basic-mmio-gpio" (I would drop "basic" part) and the
>> additional data associated with it. But it has to be new properties,
>> not changing properties. Changing the reg values doesn't work."
>>
>> So, for this to work with the existing canyonlands.dts, I need to have
>> the "amcc,dwc-otg" compatible string.
> 
> Ok, if that's the case. But still a bit confused as to what driver was
> working with it before since the binding was not defined for dwc2.
> 
>>
>> Of course, it would be great to hear from Rob Herring and/or Mark Rutland
>> about this case.
>>
>> Regards,
>> Christian
>>
>> [0] <https://patchwork.kernel.org/patch/8976221/>
>> [1] <http://lxr.free-electrons.com/source/arch/powerpc/boot/dts/canyonlands.dts#L181>
>> [2] <http://www.spinics.net/lists/devicetree/msg124538.html>
>>
>>  
>>>>
>>>> From what I can tell based would be:
>>>> bcm11351, bcm21664, bcm23550, exynos3250, stm32f429, rk3xxx,
>>>> stratix10, meson-gxbb, rt3050 and some Altera FPGAs.
>>>>
>>>>> If that's all you need then a devicetree binding should be enough
>>>>> right?
>>>> Yes. The device is working fine so far.
>>>>
>>>> Regards,
>>>> Christian
>>>>
>>>> ---
>>>> From 70dd4be016b89655a56bc8260f04683b50f07644 Mon Sep 17 00:00:00 2001
>>>> From: Christian Lamparter <chunkeey@xxxxxxxxx>
>>>> Date: Sun, 6 Nov 2016 00:39:24 +0100
>>>> Subject: [PATCH] usb: dwc2: add amcc,dwc-otg support
>>>>
>>>> This patch adds support for the "amcc,usb-otg" device
>>>> which is found in the PowerPC Canyonlands' dts.
>>>>
>>>> The device definition was added by:
>>>> commit c89b3458d8cc ("powerpc/44x: Add USB DWC DTS entry to Canyonlands board")'
>>>> but without any driver support as the dwc2 driver wasn't
>>>> available at that time.
>>>>
>>>> Note: The system can't use the generic "snps,dwc2" compatible
>>>> because of the special ahbcfg configuration. The default
>>>> GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang
>>>> when the USB and SATA is used concurrently.
>>>>
>>>> Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
>>>> Cc: John Youn <johnyoun@xxxxxxxxxxxx>
>>>> Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx>
>>>> ---
>>>> v1->v2:
>>>> 	- moved definitons to params.c
>>>> 	- removed dma_enable / host_dma parameter
>>>> 	- added dma_desc_fs_enable parameter
>>>> v2->v3:
>>>> 	- removed parameters
>>>>
>>>> Please queue this patch until GAHBCFG_HBSTLEN_INCR16 is the default
>>>> for ahbcfg.
>>>> ---
>>>>  Documentation/devicetree/bindings/usb/dwc2.txt | 1 +
>>>>  drivers/usb/dwc2/params.c                      | 1 +
>>>>  2 files changed, 2 insertions(+)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
>>>> index 10a2a4b..6ccfe85 100644
>>>> --- a/Documentation/devicetree/bindings/usb/dwc2.txt
>>>> +++ b/Documentation/devicetree/bindings/usb/dwc2.txt
>>>> @@ -12,6 +12,7 @@ Required properties:
>>>>    - "lantiq,xrx200-usb": The DWC2 USB controller instance in Lantiq XRX SoCs;
>>>>    - "amlogic,meson8b-usb": The DWC2 USB controller instance in Amlogic Meson8b SoCs;
>>>>    - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
>>>> +  - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
>>>>    - snps,dwc2: A generic DWC2 USB controller with default parameters.
>>>>  - reg : Should contain 1 register range (address and length)
>>>>  - interrupts : Should contain 1 interrupt
>>>> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
>>>> index 64d5c66..9506ab0 100644
>>>> --- a/drivers/usb/dwc2/params.c
>>>> +++ b/drivers/usb/dwc2/params.c
>>>> @@ -239,6 +239,7 @@ const struct of_device_id dwc2_of_match_table[] = {
>>>>  	{ .compatible = "samsung,s3c6400-hsotg", .data = NULL},
>>>>  	{ .compatible = "amlogic,meson8b-usb", .data = &params_amlogic },
>>>>  	{ .compatible = "amlogic,meson-gxbb-usb", .data = &params_amlogic },
>>>> +	{ .compatible = "amcc,dwc-otg", .data = NULL },
>>>>  	{},
>>>>  };
>>>>  MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
>>>>
> 
> For dwc2 part:
> 
> Acked-by: John Youn <johnyoun@xxxxxxxxxxxx>
> 

Hi Felipe,

Can you drop this from your testing/next?

I meant for the 2nd version to be applied, without the params
structure.

I can send you a clean version to apply later today.

Regards,
John
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux