Add documentation for USB3 PHY available in Northstar plus SoC Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@xxxxxxxxxxxx> --- .../devicetree/bindings/phy/brcm,nsp-usb3-phy.txt | 39 ++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt diff --git a/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt new file mode 100644 index 0000000..30cf4b9 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,nsp-usb3-phy.txt @@ -0,0 +1,39 @@ +Broadcom USB3 phy binding northstar plus SoC +This is a child bus node of "brcm,mdio-mux-nsp" node. + +Required mdio bus properties: +- reg: MDIO Bus number for the MDIO interface +- #address-cells: must be 1 +- #size-cells: must be 0 + +Required PHY properties: +- compatible: should be "brcm,nsp-usb3-phy" +- reg: Phy address in the MDIO interface +- usb3-ctrl-syscon: handler of syscon node defining physical address + of usb3 control register. +- #phy-cells: must be 0 + +Required usb3 control properties: +- compatible: should be "brcm,nsp-usb3-ctrl" +- reg: offset and length of the control registers + +Example: + + mdio@0 { + reg = <0x0>; + #address-cells = <1>; + #size-cells = <0>; + + usb3_phy: usb3-phy@10 { + compatible = "brcm,nsp-usb3-phy"; + reg = <0x10>; + usb3-ctrl-syscon = <&usb3_ctrl>; + #phy-cells = <0>; + status = "disabled"; + }; + } + + usb3_ctrl: syscon@104408 { + compatible = "brcm,nsp-usb3-ctrl", "syscon"; + reg = <0x104408 0x3fc>; + }; -- 2.1.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html