Hi Simon,
On 07.11.2016 15:57, Simon Horman wrote:
On Thu, Nov 03, 2016 at 09:07:31PM +0300, Vladimir Barinov wrote:
This supports GPIO leds on M3ULCB board
Are GPIO leds and keys also present on the H3ULCB.
Yes.
If so could you consider sending patches to enable them?
H3ULCB already includes GPIO leds and keys support in upstream kernel.
Regards,
Vladimir
Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
index fb694b8..3329f78 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
@@ -31,6 +31,17 @@
/* first 128MB is reserved for secure area. */
reg = <0x0 0x48000000 0x0 0x38000000>;
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ led5 {
+ gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ };
+ led6 {
+ gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+ };
+ };
};
&extal_clk {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
