On Thu, Nov 03, 2016 at 09:07:31PM +0300, Vladimir Barinov wrote:
> This supports GPIO leds on M3ULCB board
Are GPIO leds and keys also present on the H3ULCB.
If so could you consider sending patches to enable them?
> Signed-off-by: Vladimir Barinov <vladimir.barinov@xxxxxxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts | 13 +++++++++++++
> 1 file changed, 13 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
> index fb694b8..3329f78 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts
> @@ -31,6 +31,17 @@
> /* first 128MB is reserved for secure area. */
> reg = <0x0 0x48000000 0x0 0x38000000>;
> };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led5 {
> + gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> + };
> + led6 {
> + gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
> + };
> + };
> };
>
> &extal_clk {
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
