The Amlogic Meson GXL SoCs have an internal RMII PHY that is muxed with the external RGMII pins. The internal PHY is added in the GXL dtsi and support for each board is added in intermediate board family dtsi or final dts. This patchset depends on ARM64 dts patch at [1] Changes since v2 RFC at : [3] - Change phy Kconfig/Makefile alphabetic order - GXL dtsi cleanup - Add P230 External PHY reset - Add external PHY compatible ID string Changes since original RFC patchset at : [2] - Remove meson8b experimental phy switching - Switch to mdio-mux-mmioreg with extennded size support - Add internal phy support for S905x and p231 - Add external PHY support for p230 [1] http://lkml.kernel.org/r/1477932286-27482-1-git-send-email-narmstrong@xxxxxxxxxxxx [2] http://lkml.kernel.org/r/1477060838-14164-1-git-send-email-narmstrong@xxxxxxxxxxxx [3] http://lkml.kernel.org/r/1477932987-27871-1-git-send-email-narmstrong@xxxxxxxxxxxx Neil Armstrong (3): ARM64: dts: meson-gxl: Add ethernet nodes with internal PHY ARM64: dts: meson-gxl-p23x: Enable ethernet ARM64: dts: meson-gxl-s905x: Enable internal ethernet PHY .../boot/dts/amlogic/meson-gxl-s905d-p230.dts | 25 +++++++++++++ .../boot/dts/amlogic/meson-gxl-s905d-p231.dts | 6 +++ .../boot/dts/amlogic/meson-gxl-s905d-p23x.dtsi | 4 ++ arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi | 6 +++ arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 43 ++++++++++++++++++++++ 5 files changed, 84 insertions(+) -- 2.7.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
