Add support for an optional over current input pin which can be used to send an over current event to the regulator consumer. Cc: devicetree@xxxxxxxxxxxxxxx Signed-off-by: Axel Haslam <ahaslam@xxxxxxxxxxxx> --- Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt index 4fae41d..b145abb 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt @@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low. - gpio-open-drain: GPIO is open drain type. If this property is missing then default assumption is false. -vin-supply: Input supply name. +- over-current-gpios: Input gpio that signal an over current condition. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -26,6 +27,7 @@ Example: regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 16 0>; + over-current-gpios = <&gpio1 18 0>; startup-delay-us = <70000>; enable-active-high; regulator-boot-on; -- 2.10.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
