Hello all, This series adds a reset controller driver that uses the TI SCI protocol to manage resets. The TI SCI protocol is used to communicate with power management controllers used by some SoCs. These controllers manage the various power domains, clocks, and resets available on a SoC. This series is based on drivers for TI SCI and the first two controlled elements above, these series can be found here: TI-SCI: http://www.spinics.net/lists/arm-kernel/msg536851.html PM Domains: http://www.spinics.net/lists/devicetree/msg146621.html Clocks: https://www.spinics.net/lists/linux-clk/msg12785.html Thanks, Andrew Changes from v2: - Merged DT binding patch and reset header patch - Added locking for reset bit mask Changes from v1: - Revised dt binding - CC Linux ARM list Andrew F. Davis (2): Documentation: dt: reset: Add TI SCI reset binding reset: Add the TI SCI reset driver .../devicetree/bindings/reset/ti,sci-reset.txt | 65 +++++ MAINTAINERS | 3 + drivers/reset/Kconfig | 9 + drivers/reset/Makefile | 1 + drivers/reset/reset-ti-sci.c | 272 +++++++++++++++++++++ include/dt-bindings/reset/k2g.h | 22 ++ 6 files changed, 372 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/ti,sci-reset.txt create mode 100644 drivers/reset/reset-ti-sci.c create mode 100644 include/dt-bindings/reset/k2g.h -- 2.10.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
