On Tue, Nov 01, 2016 at 11:01:19AM -0700, Scott Branden wrote: > Hi Jon, > > On 16-11-01 10:51 AM, Jon Mason wrote: > >Changes in v3: > >* Clean-up the bgmac DT binding doc (per Rob Herring) > >* Document the lane swap binding and make it generic (Per Andrew Lunn) > Where is the documentation of the lane swap binding? Sent out the wrong branch :( Sending out v4 shortly with this patch. > > > > > > >Changes in v2: > >* Remove the PHY power-on (per Andrew Lunn) > >* Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn) > > This results on none of the original PHY code from Vikas being > > present. So, I'm removing him as an author and giving him > > "Inspired-by" credit. > >* Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian > > Fainelli) > >* Remove bgmac sleep (per Florian Fainelli) > >* Re-add bgmac chip reset (per Florian Fainelli and Ray Jui) > >* Rebased on latest net-next > >* Added patch for bcm54xx_auxctl_read, which is used in the BCM54810 > > > > > >Add support for the amac found in the Broadcom Northstar2 SoC to the > >bgmac driver. This necessitates adding support to connect to an > >externally defined phy (as described in the device tree) in the driver. > >These phy changes are in addition to the changes necessary to get NS2 > >working. > > > > > >Jon Mason (6): > > net: phy: broadcom: add bcm54xx_auxctl_read > > net: phy: broadcom: Add BCM54810 PHY entry > > Documentation: devicetree: net: add NS2 bindings to amac > > net: ethernet: bgmac: device tree phy enablement > > net: ethernet: bgmac: add NS2 support > > arm64: dts: NS2: add AMAC ethernet support > > > > .../devicetree/bindings/net/brcm,amac.txt | 16 ++-- > > arch/arm64/boot/dts/broadcom/ns2-svk.dts | 5 ++ > > arch/arm64/boot/dts/broadcom/ns2.dtsi | 12 +++ > > drivers/net/ethernet/broadcom/bgmac-bcma.c | 48 ++++++++++ > > drivers/net/ethernet/broadcom/bgmac-platform.c | 100 ++++++++++++++++++++- > > drivers/net/ethernet/broadcom/bgmac.c | 55 ++---------- > > drivers/net/ethernet/broadcom/bgmac.h | 8 ++ > > drivers/net/phy/Kconfig | 2 +- > > drivers/net/phy/broadcom.c | 68 +++++++++++++- > > include/linux/brcmphy.h | 11 +++ > > 10 files changed, 268 insertions(+), 57 deletions(-) > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
