Changes in v4: * Actually send out the lane swap binding doc patch (Per Scott Branden) * Remove unused #define (Per Andrew Lunn) Changes in v3: * Clean-up the bgmac DT binding doc (per Rob Herring) * Document the lane swap binding and make it generic (Per Andrew Lunn) Changes in v2: * Remove the PHY power-on (per Andrew Lunn) * Misc PHY clean-ups regarding comments and #defines (per Andrew Lunn) This results on none of the original PHY code from Vikas being present. So, I'm removing him as an author and giving him "Inspired-by" credit. * Move PHY lane swapping to PHY driver (per Andrew Lunn and Florian Fainelli) * Remove bgmac sleep (per Florian Fainelli) * Re-add bgmac chip reset (per Florian Fainelli and Ray Jui) * Rebased on latest net-next * Added patch for bcm54xx_auxctl_read, which is used in the BCM54810 Add support for the amac found in the Broadcom Northstar2 SoC to the bgmac driver. This necessitates adding support to connect to an externally defined phy (as described in the device tree) in the driver. These phy changes are in addition to the changes necessary to get NS2 working. Jon Mason (7): net: phy: broadcom: add bcm54xx_auxctl_read Documentation: devicetree: add PHY lane swap binding net: phy: broadcom: Add BCM54810 PHY entry Documentation: devicetree: net: add NS2 bindings to amac net: ethernet: bgmac: device tree phy enablement net: ethernet: bgmac: add NS2 support arm64: dts: NS2: add AMAC ethernet support .../devicetree/bindings/net/brcm,amac.txt | 16 ++-- Documentation/devicetree/bindings/net/phy.txt | 3 + arch/arm64/boot/dts/broadcom/ns2-svk.dts | 5 ++ arch/arm64/boot/dts/broadcom/ns2.dtsi | 12 +++ drivers/net/ethernet/broadcom/bgmac-bcma.c | 48 ++++++++++ drivers/net/ethernet/broadcom/bgmac-platform.c | 100 ++++++++++++++++++++- drivers/net/ethernet/broadcom/bgmac.c | 55 ++---------- drivers/net/ethernet/broadcom/bgmac.h | 8 ++ drivers/net/phy/Kconfig | 2 +- drivers/net/phy/broadcom.c | 68 +++++++++++++- include/linux/brcmphy.h | 10 +++ 11 files changed, 270 insertions(+), 57 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
