On Fri, Oct 21, 2016 at 03:45:59PM +0300, Tero Kristo wrote: > Add a clock implementation, TI SCI clock, that will hook to the common > clock framework, and allow each clock to be controlled via TI SCI > protocol. > > Signed-off-by: Tero Kristo <t-kristo@xxxxxx> > --- > .../devicetree/bindings/clock/ti,sci-clk.txt | 37 ++++++++++++++++++++++ > MAINTAINERS | 1 + > 2 files changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt > > diff --git a/Documentation/devicetree/bindings/clock/ti,sci-clk.txt b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt > new file mode 100644 > index 0000000..bfc3ca4 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/ti,sci-clk.txt > @@ -0,0 +1,37 @@ > +Texas Instruments TI-SCI Clocks > +=============================== > + > +All clocks on Texas Instruments' SoCs that contain a System Controller, > +are only controlled by this entity. Communication between a host processor > +running an OS and the System Controller happens through a protocol known > +as TI-SCI[1]. This clock implementation plugs into the common clock > +framework and makes use of the TI-SCI protocol on clock API requests. > + > +[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt > + > +Required properties: > +------------------- > +- compatible: Must be "ti,k2g-sci-clk" > +- #clock-cells: Shall be 2. > + In clock consumers, this cell represents the device ID and clock ID > + exposed by the PM firmware. The assignments can be found in the header > + files <dt-bindings/genpd/<soc>.h> (which covers the device IDs) and > + <dt-bindings/clock/<soc>.h> (which covers the clock IDs), where <soc> > + is the SoC involved, for example 'k2g'. > + > +Examples: > +-------- > + > +pmmc: pmmc { > + compatible = "ti,k2g-sci"; > + > + k2g_clks: k2g_clks { Use "clocks" for node name instead. > + compatible = "ti,k2g-sci-clk"; I'm starting to think all these child nodes for SCI are pointless. Is there any reason why the parent node can't be the clock provider (along with all the other providers it acks as)? > + #clock-cells = <2>; > + }; > +}; > + > +uart0: serial@2530c00 { > + compatible = "ns16550a"; > + clocks = <&k2g_clks K2G_DEV_UART0 0>; > +}; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html