Hi, Version 3 has following changes compared to v2 [1]: - rebased on top of 4.9-rc1 - dropped some of the controversial DT properties like ti,ssc-clocks etc. - driver now registers all the SCI clocks during probe time, for this, there is an array built-in to the driver with knowledge of valid clocks for the device - xlate only picks up the clocks registered during probe This series depends on the base SCI protocol support series [2] and the TI-SCI generic PM domain support series for the device ID include file [3]. Quick boot test seems to be fine. -Tero [1] http://www.spinics.net/lists/devicetree/msg141319.html [2] http://www.spinics.net/lists/devicetree/msg146621.html [3] http://www.spinics.net/lists/arm-kernel/msg536851.html Tero Kristo (3): Documentation: dt: Add TI SCI clock driver dt-binding: clock: Add k2g clock definitions clk: keystone: Add sci-clk driver support .../devicetree/bindings/clock/ti,sci-clk.txt | 37 ++ MAINTAINERS | 3 + drivers/clk/Kconfig | 9 + drivers/clk/keystone/Makefile | 1 + drivers/clk/keystone/sci-clk.c | 589 +++++++++++++++++++++ include/dt-bindings/clock/k2g.h | 234 ++++++++ 6 files changed, 873 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/ti,sci-clk.txt create mode 100644 drivers/clk/keystone/sci-clk.c create mode 100644 include/dt-bindings/clock/k2g.h -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
