Allwinner H3 SPI controller has same architecture as A31. So most configuration is identical except one thing - FIFO capacity. A31 H3 ------------------------------------ Number of controllers 4 2 Number of FIFO depth 128 64 Transfer bits 8 8 Register maps are sharable, so sun6i SPI driver is reusable with device configuration. Tested on Nano Pi M1 and SPI slave device is TI LP8860. v2: Include DTS patches Use of_device_get_match_data() helper to get device specific data Fix build warning of 64bit CPU architecture (warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]) Milo Kim (4): ARM: dts: sun8i: Add SPI pinctrl node in H3 ARM: dts: sun8i: Add SPI controller node in H3 spi: sun6i: Add binding for Allwinner H3 SPI controller spi: sun6i: Support Allwinner H3 SPI controller .../devicetree/bindings/spi/spi-sun6i.txt | 25 +++++++++++- arch/arm/boot/dts/sun8i-h3.dtsi | 46 ++++++++++++++++++++++ drivers/spi/spi-sun6i.c | 18 ++++++--- 3 files changed, 82 insertions(+), 7 deletions(-) -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html