From: Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx>
The change is to move pv88080 binding document
from the regulator directory to mfd binding directory
for PV88080 PMIC MFD support.
Signed-off-by: Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx>
---
This patch applies against linux-next and next-20161026
Hi,
Change since PATCH V1
- Patch separated from PATCH V1
Regards,
Eric Jeong, Dialog Semiconductor Ltd.
Documentation/devicetree/bindings/mfd/pv88080.txt | 63 ++++++++++++++++++++
.../devicetree/bindings/regulator/pv88080.txt | 62 -------------------
2 files changed, 63 insertions(+), 62 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/pv88080.txt
delete mode 100644 Documentation/devicetree/bindings/regulator/pv88080.txt
diff --git a/Documentation/devicetree/bindings/mfd/pv88080.txt b/Documentation/devicetree/bindings/mfd/pv88080.txt
new file mode 100644
index 0000000..7b556b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/pv88080.txt
@@ -0,0 +1,63 @@
+* Powerventure Semiconductor PV88080 PMIC
+
+Required properties:
+- compatible: Must be one of the following, depending on the
+ silicon version:
+ - "pvs,pv88080" (DEPRECATED)
+
+ - "pvs,pv88080-aa" for PV88080 AA or AB silicon
+ - "pvs,pv88080-ba" for PV88080 BA or BB silicon
+ NOTE: The use of the compatibles with no silicon version is deprecated.
+- reg: I2C slave address, usually 0x49
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+ device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+ BUCK1, BUCK2, BUCK3 and HVBUCK.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+ and gpio.txt for more information.
+
+Example:
+
+ pmic: pv88080@49 {
+ compatible = "pvs,pv88080-ba";
+ reg = <0x49>;
+ interrupt-parent = <&gpio>;
+ interrupts = <24 24>;
+
+ regulators {
+ BUCK1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = < 220000>;
+ regulator-max-microamp = <7040000>;
+ };
+
+ BUCK2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = < 600000>;
+ regulator-max-microvolt = <1393750>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ };
+
+ BUCK3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <1400000>;
+ regulator-max-microvolt = <2193750>;
+ regulator-min-microamp = <1496000>;
+ regulator-max-microamp = <4189000>;
+ };
+
+ HVBUCK {
+ regulator-name = "hvbuck";
+ regulator-min-microvolt = < 5000>;
+ regulator-max-microvolt = <1275000>;
+ };
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt
deleted file mode 100644
index e6e4b9c8..0000000
--- a/Documentation/devicetree/bindings/regulator/pv88080.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-* Powerventure Semiconductor PV88080 Voltage Regulator
-
-Required properties:
-- compatible: Must be one of the following, depending on the
- silicon version:
- - "pvs,pv88080" (DEPRECATED)
-
- - "pvs,pv88080-aa" for PV88080 AA or AB silicon
- - "pvs,pv88080-ba" for PV88080 BA or BB silicon
- NOTE: The use of the compatibles with no silicon version is deprecated.
-- reg: I2C slave address, usually 0x49
-- interrupts: the interrupt outputs of the controller
-- regulators: A node that houses a sub-node for each regulator within the
- device. Each sub-node is identified using the node's name, with valid
- values listed below. The content of each sub-node is defined by the
- standard binding for regulators; see regulator.txt.
- BUCK1, BUCK2, BUCK3 and HVBUCK.
-
-Optional properties:
-- Any optional property defined in regulator.txt
-
-Example:
-
- pmic: pv88080@49 {
- compatible = "pvs,pv88080-ba";
- reg = <0x49>;
- interrupt-parent = <&gpio>;
- interrupts = <24 24>;
-
- regulators {
- BUCK1 {
- regulator-name = "buck1";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1393750>;
- regulator-min-microamp = < 220000>;
- regulator-max-microamp = <7040000>;
- };
-
- BUCK2 {
- regulator-name = "buck2";
- regulator-min-microvolt = < 600000>;
- regulator-max-microvolt = <1393750>;
- regulator-min-microamp = <1496000>;
- regulator-max-microamp = <4189000>;
- };
-
- BUCK3 {
- regulator-name = "buck3";
- regulator-min-microvolt = <1400000>;
- regulator-max-microvolt = <2193750>;
- regulator-min-microamp = <1496000>;
- regulator-max-microamp = <4189000>;
- };
-
- HVBUCK {
- regulator-name = "hvbuck";
- regulator-min-microvolt = < 5000>;
- regulator-max-microvolt = <1275000>;
- };
- };
- };
-
--
end-of-patch for PATCH V2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
