The STMicrolectornics's STM32F746 MCU has the following main features:
- Cortex-M7 core running up to @216MHz
- 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM)
- FMC controller to connect SDRAM, NOR and NAND memories
- Dual mode QSPI
- SD/MMC/SDIO support
- Ethernet controller
- USB OTFG FS & HS controllers
- I2C, SPI, CAN busses support
- Several 16 & 32 bits general purpose timers
- Serial Audio interface
- LCD controller
- HDMI-CEC
- SPDIFRX
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@xxxxxx>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd26..343dda2 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -721,7 +721,8 @@ dtb-$(CONFIG_ARCH_STI) += \
dtb-$(CONFIG_ARCH_STM32)+= \
stm32f429-disco.dtb \
stm32f469-disco.dtb \
- stm32429i-eval.dtb
+ stm32429i-eval.dtb \
+ stm32746g-eval.dtb
dtb-$(CONFIG_MACH_SUN4I) += \
sun4i-a10-a1000.dtb \
sun4i-a10-ba10-tvbox.dtb \
diff --git a/arch/arm/boot/dts/stm32746g-eval.dts b/arch/arm/boot/dts/stm32746g-eval.dts
new file mode 100644
index 0000000..aa03fac
--- /dev/null
+++ b/arch/arm/boot/dts/stm32746g-eval.dts
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "stm32f746.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "STMicroelectronics STM32746g-EVAL board";
+ compatible = "st,stm32746g-eval", "st,stm32f746";
+
+ chosen {
+ bootargs = "root=/dev/ram";
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0xc0000000 0x2000000>;
+ };
+
+ aliases {
+ serial0 = &usart1;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ green {
+ gpios = <&gpiof 10 1>;
+ linux,default-trigger = "heartbeat";
+ };
+ red {
+ gpios = <&gpiob 7 1>;
+ };
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@0 {
+ label = "Wake up";
+ linux,code = <KEY_WAKEUP>;
+ gpios = <&gpioc 13 0>;
+ };
+ };
+};
+
+&clk_hse {
+ clock-frequency = <25000000>;
+};
+
+&usart1 {
+ pinctrl-0 = <&usart1_pins_a>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32f746.dtsi b/arch/arm/boot/dts/stm32f746.dtsi
new file mode 100644
index 0000000..f321ffe
--- /dev/null
+++ b/arch/arm/boot/dts/stm32f746.dtsi
@@ -0,0 +1,304 @@
+/*
+ * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@xxxxxxxxx>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton.dtsi"
+#include "armv7-m.dtsi"
+#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
+
+/ {
+ clocks {
+ clk_hse: clk-hse {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+ };
+
+ soc {
+ timer2: timer@40000000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000000 0x400>;
+ interrupts = <28>;
+ clocks = <&rcc 0 128>;
+ status = "disabled";
+ };
+
+ timer3: timer@40000400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000400 0x400>;
+ interrupts = <29>;
+ clocks = <&rcc 0 129>;
+ status = "disabled";
+ };
+
+ timer4: timer@40000800 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000800 0x400>;
+ interrupts = <30>;
+ clocks = <&rcc 0 130>;
+ status = "disabled";
+ };
+
+ timer5: timer@40000c00 {
+ compatible = "st,stm32-timer";
+ reg = <0x40000c00 0x400>;
+ interrupts = <50>;
+ clocks = <&rcc 0 131>;
+ };
+
+ timer6: timer@40001000 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001000 0x400>;
+ interrupts = <54>;
+ clocks = <&rcc 0 132>;
+ status = "disabled";
+ };
+
+ timer7: timer@40001400 {
+ compatible = "st,stm32-timer";
+ reg = <0x40001400 0x400>;
+ interrupts = <55>;
+ clocks = <&rcc 0 133>;
+ status = "disabled";
+ };
+
+ usart2: serial@40004400 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40004400 0x400>;
+ interrupts = <38>;
+ clocks = <&rcc 0 145>;
+ status = "disabled";
+ };
+
+ usart3: serial@40004800 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40004800 0x400>;
+ interrupts = <39>;
+ clocks = <&rcc 0 146>;
+ status = "disabled";
+ };
+
+ usart4: serial@40004c00 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40004c00 0x400>;
+ interrupts = <52>;
+ clocks = <&rcc 0 147>;
+ status = "disabled";
+ };
+
+ usart5: serial@40005000 {
+ compatible = "st,stm32f7-uart";
+ reg = <0x40005000 0x400>;
+ interrupts = <53>;
+ clocks = <&rcc 0 148>;
+ status = "disabled";
+ };
+
+ usart7: serial@40007800 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40007800 0x400>;
+ interrupts = <82>;
+ clocks = <&rcc 0 158>;
+ status = "disabled";
+ };
+
+ usart8: serial@40007c00 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40007c00 0x400>;
+ interrupts = <83>;
+ clocks = <&rcc 0 159>;
+ status = "disabled";
+ };
+
+ usart1: serial@40011000 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&rcc 0 164>;
+ status = "disabled";
+ };
+
+ usart6: serial@40011400 {
+ compatible = "st,stm32f7-usart", "st,stm32f7-uart";
+ reg = <0x40011400 0x400>;
+ interrupts = <71>;
+ clocks = <&rcc 0 165>;
+ status = "disabled";
+ };
+
+ syscfg: system-config@40013800 {
+ compatible = "syscon";
+ reg = <0x40013800 0x400>;
+ };
+
+ exti: interrupt-controller@40013c00 {
+ compatible = "st,stm32-exti";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ reg = <0x40013C00 0x400>;
+ interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
+ };
+
+ pin-controller {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,stm32f746-pinctrl";
+ ranges = <0 0x40020000 0x3000>;
+ interrupt-parent = <&exti>;
+ st,syscfg = <&syscfg 0x8>;
+ pins-are-numbered;
+
+ gpioa: gpio@40020000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x0 0x400>;
+ clocks = <&rcc 0 256>;
+ st,bank-name = "GPIOA";
+ };
+
+ gpiob: gpio@40020400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x400 0x400>;
+ clocks = <&rcc 0 257>;
+ st,bank-name = "GPIOB";
+ };
+
+ gpioc: gpio@40020800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x800 0x400>;
+ clocks = <&rcc 0 258>;
+ st,bank-name = "GPIOC";
+ };
+
+ gpiod: gpio@40020c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0xc00 0x400>;
+ clocks = <&rcc 0 259>;
+ st,bank-name = "GPIOD";
+ };
+
+ gpioe: gpio@40021000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1000 0x400>;
+ clocks = <&rcc 0 260>;
+ st,bank-name = "GPIOE";
+ };
+
+ gpiof: gpio@40021400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1400 0x400>;
+ clocks = <&rcc 0 261>;
+ st,bank-name = "GPIOF";
+ };
+
+ gpiog: gpio@40021800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1800 0x400>;
+ clocks = <&rcc 0 262>;
+ st,bank-name = "GPIOG";
+ };
+
+ gpioh: gpio@40021c00 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x1c00 0x400>;
+ clocks = <&rcc 0 263>;
+ st,bank-name = "GPIOH";
+ };
+
+ gpioi: gpio@40022000 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2000 0x400>;
+ clocks = <&rcc 0 264>;
+ st,bank-name = "GPIOI";
+ };
+
+ gpioj: gpio@40022400 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2400 0x400>;
+ clocks = <&rcc 0 265>;
+ st,bank-name = "GPIOJ";
+ };
+
+ gpiok: gpio@40022800 {
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0x2800 0x400>;
+ clocks = <&rcc 0 266>;
+ st,bank-name = "GPIOK";
+ };
+
+ usart1_pins_a: usart1@0 {
+ pins1 {
+ pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
+ bias-disable;
+ drive-push-pull;
+ slew-rate = <0>;
+ };
+ pins2 {
+ pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
+ bias-disable;
+ };
+ };
+ };
+
+ rcc: rcc@40023800 {
+ #clock-cells = <2>;
+ compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
+ reg = <0x40023800 0x400>;
+ clocks = <&clk_hse>;
+ };
+ };
+};
+
+&systick {
+ clocks = <&rcc 1 0>;
+ status = "okay";
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
