This series adds basic support for STM32F746 MCU and stm32746g-eval board. With it, you can boot stm32746g-eval board successfully. In this series timer, usart/uart, exti, rng, basic rcc IPs are supported. Other Ips (Ethernet, dma, ...) will come later. For your information: The STMicrolectornics's STM32F746 MCU has the following main features: - Cortex-M7 core running up to @216MHz - 1MB internal flash, 320KBytes internal RAM (+4KB of backup SRAM) - FMC controller to connect SDRAM, NOR and NAND memories - Dual mode QSPI - SD/MMC/SDIO support - Ethernet controller - USB OTFG FS & HS controllers - I2C, SPI, CAN busses support - Several 16 & 32 bits general purpose timers - Serial Audio interface - LCD controller - HDMI-CEC - SPDIFRX Regards Alex Alexandre TORGUE (5): ARM: mach-stm32: Add a new SOC - STM32F746 ARM: Kconfig: Introduce MACH_STM32F746 flag ARM: dts: Add STM32F746 MCU and STM32746g-EVAL board ARM: configs: Add new config fragment to change RAM start point ARM: configs: Add new config fragment to change RAM size Documentation/arm/stm32/overview.txt | 3 +- Documentation/arm/stm32/stm32f746-overview.txt | 34 +++ arch/arm/Kconfig | 5 + arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/stm32746g-eval.dts | 96 ++++++++ arch/arm/boot/dts/stm32f746.dtsi | 304 +++++++++++++++++++++++++ arch/arm/configs/dram_0xc0000000.config | 1 + arch/arm/configs/dram_size_0x2000000.config | 1 + arch/arm/mach-stm32/board-dt.c | 1 + 9 files changed, 446 insertions(+), 2 deletions(-) create mode 100644 Documentation/arm/stm32/stm32f746-overview.txt create mode 100644 arch/arm/boot/dts/stm32746g-eval.dts create mode 100644 arch/arm/boot/dts/stm32f746.dtsi create mode 100644 arch/arm/configs/dram_0xc0000000.config create mode 100644 arch/arm/configs/dram_size_0x2000000.config -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html