Hi all, This series includes several patches to update the support for our platforms. Here are the main goals of this series: 1- Adding support for our latest SOM (SOM2) 2- Fix panel naming consistency across the boards -> This way our U-Boot bootscript[1] can easily set the panel compatible. 3- Fix USB PHY reset for some boards -> U-Boot used to always set the reset pin whether usb was used or not. Anyway, the kernel should not be dependent on the bootloader. Let me know if you have any question. Regards, Gary [1] https://github.com/boundarydevices/u-boot-imx6/blob/boundary-v2016.03/board/boundary/nitrogen6x/6x_bootscript-mainline.txt Gary Bisson (5): ARM: dts: imx: add Boundary Devices Nitrogen6_SOM2 support ARM: dts: imx6qdl-sabrelite: rename panel nodes ARM: dts: imx6qdl-sabrelite: add missing USB PHY reset control ARM: dts: imx6qdl-nitrogen6x: rename panel nodes ARM: dts: imx6qdl-nitrogen6x: add missing USB PHY reset control arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/imx6q-nitrogen6_som2.dts | 53 ++ arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi | 770 ++++++++++++++++++++++++++ arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi | 24 +- arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 24 +- 5 files changed, 868 insertions(+), 4 deletions(-) create mode 100644 arch/arm/boot/dts/imx6q-nitrogen6_som2.dts create mode 100644 arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html