On Tuesday, October 25, 2016 3:41 PM, Lee Jones wrote:
> On Tue, 25 Oct 2016, Eric Jeong wrote:
>
> >
> > From: Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx>
> >
> > This patch adds support for the PV88080 PMIC.
> >
> > This pathch is done as part of the existing PV88080 regulator driver
> > by expanding the driver for GPIO function support.
> >
> > The MFD core driver provides communication through the I2C interface.
> > and contains the following components:
> >
> > - Regulators
> > - Configurable GPIOs
> >
> > Kconfig and Makefile are updated to reflect support for PV88080 PMIC.
> >
> > Signed-off-by: Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx>
> >
> > ---
> > This patch applies against linux-next and next-20161024
> >
> > Hi,
> >
> > This change is made as a single patch. Because, to ensure that kernel
> > builds and runs properly after this patch.
> >
> > The regulator device driver for PV88080 IC is submitted to Linux kernel.
> > And now, GPIO function is required. In order to add GPIO driver, MFD
> > driver is also required.
> >
> > Changes
> > - Add MFD driver.
> > - Add GPIO driver.
> > - Update regulator driver to reflect the support.
> > - Delete pv88080-regulator.h file.
> > - Move binding document to mfd directory.
> >
> > Regards,
> > Eric Jeong, Dialog Semiconductor Ltd.
> >
> >
> > Documentation/devicetree/bindings/mfd/pv88080.txt | 63 +++++
> > .../devicetree/bindings/regulator/pv88080.txt | 62 -----
> > drivers/gpio/Kconfig | 11 +
> > drivers/gpio/Makefile | 1 +
> > drivers/gpio/gpio-pv88080.c | 195 ++++++++++++++
> > drivers/mfd/Kconfig | 12 +
> > drivers/mfd/Makefile | 2 +
> > drivers/mfd/pv88080-core.c | 270 ++++++++++++++++++++
> > drivers/mfd/pv88080-i2c.c | 99 +++++++
> > drivers/regulator/Kconfig | 5 +-
> > drivers/regulator/pv88080-regulator.c | 202 ++++++---------
> > drivers/regulator/pv88080-regulator.h | 118 ---------
> > include/linux/mfd/pv88080.h | 236 +++++++++++++++++
> > 13 files changed, 970 insertions(+), 306 deletions(-) create mode
> > 100644 Documentation/devicetree/bindings/mfd/pv88080.txt
> > delete mode 100644
> > Documentation/devicetree/bindings/regulator/pv88080.txt
> > create mode 100644 drivers/gpio/gpio-pv88080.c create mode 100644
> > drivers/mfd/pv88080-core.c create mode 100644
> > drivers/mfd/pv88080-i2c.c delete mode 100644
> > drivers/regulator/pv88080-regulator.h
> > create mode 100644 include/linux/mfd/pv88080.h
>
> You're going to need to split this patch up as much as possible.
>
> No one is going to want to review a 1200 line patch.
>
> --
> Lee Jones
> Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source
> software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog
Sorry for inconvenience.
I will separate the patch and send again.
Regards
Eric
��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
