On Tue, 25 Oct 2016, Eric Jeong wrote: > > From: Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx> > > This patch adds support for the PV88080 PMIC. > > This pathch is done as part of the existing PV88080 regulator driver > by expanding the driver for GPIO function support. > > The MFD core driver provides communication through the I2C interface. > and contains the following components: > > - Regulators > - Configurable GPIOs > > Kconfig and Makefile are updated to reflect support for PV88080 PMIC. > > Signed-off-by: Eric Jeong <eric.jeong.opensource@xxxxxxxxxxx> > > --- > This patch applies against linux-next and next-20161024 > > Hi, > > This change is made as a single patch. Because, to ensure that > kernel builds and runs properly after this patch. > > The regulator device driver for PV88080 IC is submitted to Linux kernel. > And now, GPIO function is required. In order to add GPIO driver, > MFD driver is also required. > > Changes > - Add MFD driver. > - Add GPIO driver. > - Update regulator driver to reflect the support. > - Delete pv88080-regulator.h file. > - Move binding document to mfd directory. > > Regards, > Eric Jeong, Dialog Semiconductor Ltd. > > > Documentation/devicetree/bindings/mfd/pv88080.txt | 63 +++++ > .../devicetree/bindings/regulator/pv88080.txt | 62 ----- > drivers/gpio/Kconfig | 11 + > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-pv88080.c | 195 ++++++++++++++ > drivers/mfd/Kconfig | 12 + > drivers/mfd/Makefile | 2 + > drivers/mfd/pv88080-core.c | 270 ++++++++++++++++++++ > drivers/mfd/pv88080-i2c.c | 99 +++++++ > drivers/regulator/Kconfig | 5 +- > drivers/regulator/pv88080-regulator.c | 202 ++++++--------- > drivers/regulator/pv88080-regulator.h | 118 --------- > include/linux/mfd/pv88080.h | 236 +++++++++++++++++ > 13 files changed, 970 insertions(+), 306 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mfd/pv88080.txt > delete mode 100644 Documentation/devicetree/bindings/regulator/pv88080.txt > create mode 100644 drivers/gpio/gpio-pv88080.c > create mode 100644 drivers/mfd/pv88080-core.c > create mode 100644 drivers/mfd/pv88080-i2c.c > delete mode 100644 drivers/regulator/pv88080-regulator.h > create mode 100644 include/linux/mfd/pv88080.h You're going to need to split this patch up as much as possible. No one is going to want to review a 1200 line patch. -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
