[PATCH] i2c: rk3x: Give the tuning value 0 during rk3x_i2c_v0_calc_timings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




We found a bug that i2c transfer sometimes failed on 3066a board with
stabel-4.8, the con register would be updated by uninitialized tuning
value, it made the i2c transfer failed.

So give the tuning value to be zero during rk3x_i2c_v0_calc_timings.

Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-rk3x.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 50702c7..df22066 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -694,6 +694,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
 	t_calc->div_low--;
 	t_calc->div_high--;
 
+	/* Give the tuning value 0, that would not update con register */
+	t_calc->tuning = 0;
 	/* Maximum divider supported by hw is 0xffff */
 	if (t_calc->div_low > 0xffff) {
 		t_calc->div_low = 0xffff;
-- 
1.9.1


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux