Goodix touchscreen controller supports the ability to update its settings at runtime. Currently, the driver supports this by loading a firmware and reconfiguring the panel. However, this may lead to a large quantity of firmwares being created and managed. This is a hassle since likely a preexisting firmware or even the default configuration is good enough and only a couple of changes need to be made. This patchset adds the capability to dynamically alter the firmware utilizing several new DT properties. These new properties will allow a user to specify the touchscreen resolution and also allow x and y coordinates to be interchanged. All of this configuration changes are done dynamically by the driver and can work using the default touchscreen controller configuration or even on top of a firmware that was loaded. Franklin S Cooper Jr (4): Input: goodix - Restructure cfg checksum function Input: goodix - Allow tweaking of configuration file dynamically Input: goodix - Tweak configuration to use passed in touchscreen resolution Input: goodix - Support interchanging x and y coordinates in hardware .../bindings/input/touchscreen/goodix.txt | 4 + drivers/input/touchscreen/goodix.c | 109 +++++++++++++++++---- 2 files changed, 96 insertions(+), 17 deletions(-) -- 2.10.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html