Re: [PATCH v2 3/3] mtd: s3c2410: parse the device configuration from OF node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 19 Oct 2016 17:52:05 -0200
Sergio Prado <sergio.prado@xxxxxxxxxxxxxx> wrote:

> Allows configuring Samsung's s3c2410 memory controller using a
> devicetree.
> 
> Signed-off-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx>
> ---
>  drivers/mtd/nand/s3c2410.c                     | 155 ++++++++++++++++++++++---
>  include/linux/platform_data/mtd-nand-s3c2410.h |   1 +
>  2 files changed, 140 insertions(+), 16 deletions(-)
> 
> diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
> index 371db0d48135..52f768f01b0d 100644
> --- a/drivers/mtd/nand/s3c2410.c
> +++ b/drivers/mtd/nand/s3c2410.c
> @@ -39,6 +39,8 @@
>  #include <linux/slab.h>
>  #include <linux/clk.h>
>  #include <linux/cpufreq.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
>  
>  #include <linux/mtd/mtd.h>
>  #include <linux/mtd/nand.h>
> @@ -185,6 +187,22 @@ struct s3c2410_nand_info {
>  #endif
>  };
>  
> +struct s3c24XX_nand_devtype_data {
> +	enum s3c_cpu_type type;
> +};
> +
> +static const struct s3c24XX_nand_devtype_data s3c2410_nand_devtype_data = {
> +	.type = TYPE_S3C2410,
> +};
> +
> +static const struct s3c24XX_nand_devtype_data s3c2412_nand_devtype_data = {
> +	.type = TYPE_S3C2412,
> +};
> +
> +static const struct s3c24XX_nand_devtype_data s3c2440_nand_devtype_data = {
> +	.type = TYPE_S3C2440,
> +};
> +
>  /* conversion functions */
>  
>  static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd)
> @@ -794,6 +812,34 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
>  	return -ENODEV;
>  }
>  
> +static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd,
> +					     const struct nand_data_interface *conf,
> +					     bool check_only)
> +{
> +	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
> +	struct s3c2410_platform_nand *pdata = info->platform;
> +	struct device_node *np = info->device->of_node;
> +	const struct nand_sdr_timings *timings;
> +	int tacls;
> +
> +	/* auto-detect timings when booting with a device tree */
> +	if (np) {

That's not really dependent on the use of DT, but I understand why you
want to keep it unchanged for users who did not switch to DT.

Instead of testing the np value here, I'd recommend that you
conditionally assign chip->setup_data_interface to
s3c2410_nand_setup_data_interface in s3c2410_nand_init_chip().

Can you also explain in more details in the comment why you don't want
to do it for non-DT configs (keep behavior unchanged for legacy boards)?

> +		timings = nand_get_sdr_timings(conf);
> +		if (IS_ERR(timings))
> +			return -ENOTSUPP;
> +
> +		tacls = timings->tCLS_min - timings->tWP_min;
> +		if (tacls < 0)
> +			tacls = 0;
> +
> +		pdata->tacls  = DIV_ROUND_UP(tacls, 1000);
> +		pdata->twrph0 = DIV_ROUND_UP(timings->tWP_min, 1000);
> +		pdata->twrph1 = DIV_ROUND_UP(timings->tCLH_min, 1000);
> +	}
> +
> +	return 0;
> +}


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux