Allows configuring Samsung's s3c2410 memory controller using a devicetree. Signed-off-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx> --- drivers/mtd/nand/s3c2410.c | 155 ++++++++++++++++++++++--- include/linux/platform_data/mtd-nand-s3c2410.h | 1 + 2 files changed, 140 insertions(+), 16 deletions(-) diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 371db0d48135..52f768f01b0d 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -39,6 +39,8 @@ #include <linux/slab.h> #include <linux/clk.h> #include <linux/cpufreq.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -185,6 +187,22 @@ struct s3c2410_nand_info { #endif }; +struct s3c24XX_nand_devtype_data { + enum s3c_cpu_type type; +}; + +static const struct s3c24XX_nand_devtype_data s3c2410_nand_devtype_data = { + .type = TYPE_S3C2410, +}; + +static const struct s3c24XX_nand_devtype_data s3c2412_nand_devtype_data = { + .type = TYPE_S3C2412, +}; + +static const struct s3c24XX_nand_devtype_data s3c2440_nand_devtype_data = { + .type = TYPE_S3C2440, +}; + /* conversion functions */ static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd) @@ -794,6 +812,34 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info, return -ENODEV; } +static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd, + const struct nand_data_interface *conf, + bool check_only) +{ + struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); + struct s3c2410_platform_nand *pdata = info->platform; + struct device_node *np = info->device->of_node; + const struct nand_sdr_timings *timings; + int tacls; + + /* auto-detect timings when booting with a device tree */ + if (np) { + timings = nand_get_sdr_timings(conf); + if (IS_ERR(timings)) + return -ENOTSUPP; + + tacls = timings->tCLS_min - timings->tWP_min; + if (tacls < 0) + tacls = 0; + + pdata->tacls = DIV_ROUND_UP(tacls, 1000); + pdata->twrph0 = DIV_ROUND_UP(timings->tWP_min, 1000); + pdata->twrph1 = DIV_ROUND_UP(timings->tCLH_min, 1000); + } + + return 0; +} + /** * s3c2410_nand_init_chip - initialise a single instance of an chip * @info: The base NAND controller the chip is on. @@ -811,9 +857,12 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, struct nand_chip *chip = &nmtd->chip; void __iomem *regs = info->regs; + nand_set_flash_node(chip, set->of_node); + chip->write_buf = s3c2410_nand_write_buf; chip->read_buf = s3c2410_nand_read_buf; chip->select_chip = s3c2410_nand_select_chip; + chip->setup_data_interface = s3c2410_nand_setup_data_interface; chip->chip_delay = 50; nand_set_controller_data(chip, nmtd); chip->options = set->options; @@ -859,12 +908,9 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, chip->ecc.mode = info->platform->ecc_mode; /* If you use u-boot BBT creation code, specifying this flag will - * let the kernel fish out the BBT from the NAND, and also skip the - * full NAND scan that can take 1/2s or so. Little things... */ - if (set->flash_bbt) { + * let the kernel fish out the BBT from the NAND */ + if (set->flash_bbt) chip->bbt_options |= NAND_BBT_USE_FLASH; - chip->options |= NAND_SKIP_BBTSCAN; - } } /** @@ -943,6 +989,77 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info, return -EINVAL; } + if (chip->bbt_options & NAND_BBT_USE_FLASH) + chip->options |= NAND_SKIP_BBTSCAN; + + return 0; +} + +static const struct of_device_id s3c24xx_nand_dt_ids[] = { + { + .compatible = "samsung,s3c2410-nand", + .data = &s3c2410_nand_devtype_data, + }, { + .compatible = "samsung,s3c2412-nand", /* also compatible with s3c6400 */ + .data = &s3c2412_nand_devtype_data, + }, { + .compatible = "samsung,s3c2440-nand", + .data = &s3c2440_nand_devtype_data, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, s3c24xx_nand_dt_ids); + +static int s3c24xx_nand_probe_dt(struct platform_device *pdev) +{ + const struct s3c24XX_nand_devtype_data *devtype_data; + struct s3c2410_platform_nand *pdata; + struct s3c2410_nand_info *info = platform_get_drvdata(pdev); + struct device_node *np = pdev->dev.of_node, *child; + struct s3c2410_nand_set *sets; + + devtype_data = of_device_get_match_data(&pdev->dev); + if (!devtype_data) + return -ENODEV; + + info->cpu_type = devtype_data->type; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; + + pdev->dev.platform_data = pdata; + + pdata->nr_sets = of_get_child_count(np); + if (!pdata->nr_sets) + return 0; + + sets = devm_kzalloc(&pdev->dev, sizeof(*sets) * pdata->nr_sets, GFP_KERNEL); + if (!sets) + return -ENOMEM; + + pdata->sets = sets; + + for_each_available_child_of_node(np, child) { + + sets->name = (char *)child->name; + sets->of_node = child; + sets->nr_chips = 1; + + of_node_get(child); + + sets++; + } + + return 0; +} + +static int s3c24xx_nand_probe_pdata(struct platform_device *pdev) +{ + struct s3c2410_nand_info *info = platform_get_drvdata(pdev); + + info->cpu_type = platform_get_device_id(pdev)->driver_data; + return 0; } @@ -955,8 +1072,7 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info, */ static int s3c24xx_nand_probe(struct platform_device *pdev) { - struct s3c2410_platform_nand *plat = to_nand_plat(pdev); - enum s3c_cpu_type cpu_type; + struct s3c2410_platform_nand *plat; struct s3c2410_nand_info *info; struct s3c2410_nand_mtd *nmtd; struct s3c2410_nand_set *sets; @@ -966,8 +1082,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) int nr_sets; int setno; - cpu_type = platform_get_device_id(pdev)->driver_data; - info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (info == NULL) { err = -ENOMEM; @@ -989,6 +1103,16 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) s3c2410_nand_clk_set_state(info, CLOCK_ENABLE); + if (pdev->dev.of_node) + err = s3c24xx_nand_probe_dt(pdev); + else + err = s3c24xx_nand_probe_pdata(pdev); + + if (err) + goto exit_error; + + plat = to_nand_plat(pdev); + /* allocate and map the resource */ /* currently we assume we have the one resource */ @@ -997,7 +1121,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) info->device = &pdev->dev; info->platform = plat; - info->cpu_type = cpu_type; info->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(info->regs)) { @@ -1007,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) dev_dbg(&pdev->dev, "mapped registers at %p\n", info->regs); - /* initialise the hardware */ - - err = s3c2410_nand_inithw(info); - if (err != 0) - goto exit_error; - sets = (plat != NULL) ? plat->sets : NULL; nr_sets = (plat != NULL) ? plat->nr_sets : 1; @@ -1056,6 +1173,11 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) sets++; } + /* initialise the hardware */ + err = s3c2410_nand_inithw(info); + if (err != 0) + goto exit_error; + err = s3c2410_nand_cpufreq_register(info); if (err < 0) { dev_err(&pdev->dev, "failed to init cpufreq support\n"); @@ -1156,6 +1278,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev) .id_table = s3c24xx_driver_ids, .driver = { .name = "s3c24xx-nand", + .of_match_table = s3c24xx_nand_dt_ids, }, }; diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h index 729af13d1773..f01659026b26 100644 --- a/include/linux/platform_data/mtd-nand-s3c2410.h +++ b/include/linux/platform_data/mtd-nand-s3c2410.h @@ -40,6 +40,7 @@ struct s3c2410_nand_set { char *name; int *nr_map; struct mtd_partition *partitions; + struct device_node *of_node; }; struct s3c2410_platform_nand { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html