On Fri, Oct 14, 2016 at 10:02:27AM +0800, Xiaogang Cui wrote: > This is a initial version so it's very similar with syscon > reboot mode driver. We will add more functionalities in the > further after dependency is ready. > > Signed-off-by: Xiaogang Cui <xiaogang@xxxxxxxxxxxxxx> > --- > .../bindings/power_supply/qcom-reboot-mode.txt | 23 +++++ > drivers/power/reset/Kconfig | 10 ++ > drivers/power/reset/Makefile | 1 + > drivers/power/reset/qcom-reboot-mode.c | 109 +++++++++++++++++++++ > 4 files changed, 143 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt > create mode 100644 drivers/power/reset/qcom-reboot-mode.c > > diff --git a/Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt b/Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt > new file mode 100644 > index 0000000..8b33592 > --- /dev/null > +++ b/Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt > @@ -0,0 +1,23 @@ > +Qualcomm Reboot Mode Driver > + > +Qualcomm reboot mode driver based on reboot mode framework to update > +SPMI specific bits. > + > +Required Properties: > +-compatible: "qcom,reboot-mode" > +-offset: offset of the SPMI reboot mode register > + > +Optional Properties: > +-mask: mask of reboot mode > +-mode-xxx: magic of reboot mode > + > +Example: > + qcom,reboot-mode@88f { Node names should be generic. Just reboot-mode@... > + compatible = "qcom,reboot-mode"; > + offset = <0x88f>; > + mode-normal = <0x00>; > + mode-recovery = <0x04>; > + mode-bootloader = <0x08>; > + mode-rtc = <0x0C>; In addition to what John said, I think vendor specfic modes should have a vendor prefix (e.g. qcom,mode-rtc). That will complicate parsing a bit though. Rob -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html