在 2016-10-14 11:25,John Stultz 写道:
On Thu, Oct 13, 2016 at 7:02 PM, Xiaogang Cui <xiaogang@xxxxxxxxxxxxxx>
wrote:
This is a initial version so it's very similar with syscon
reboot mode driver. We will add more functionalities in the
further after dependency is ready.
Signed-off-by: Xiaogang Cui <xiaogang@xxxxxxxxxxxxxx>
---
.../bindings/power_supply/qcom-reboot-mode.txt | 23 +++++
drivers/power/reset/Kconfig | 10 ++
drivers/power/reset/Makefile | 1 +
drivers/power/reset/qcom-reboot-mode.c | 109
+++++++++++++++++++++
4 files changed, 143 insertions(+)
create mode 100644
Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt
create mode 100644 drivers/power/reset/qcom-reboot-mode.c
diff --git
a/Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt
b/Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt
new file mode 100644
index 0000000..8b33592
--- /dev/null
+++
b/Documentation/devicetree/bindings/power_supply/qcom-reboot-mode.txt
@@ -0,0 +1,23 @@
+Qualcomm Reboot Mode Driver
+
+Qualcomm reboot mode driver based on reboot mode framework to update
+SPMI specific bits.
+
+Required Properties:
+-compatible: "qcom,reboot-mode"
+-offset: offset of the SPMI reboot mode register
+
+Optional Properties:
+-mask: mask of reboot mode
+-mode-xxx: magic of reboot mode
+
+Example:
+ qcom,reboot-mode@88f {
+ compatible = "qcom,reboot-mode";
+ offset = <0x88f>;
+ mode-normal = <0x00>;
+ mode-recovery = <0x04>;
+ mode-bootloader = <0x08>;
+ mode-rtc = <0x0C>;
So I don't think we've had a "rtc" mode before. This needs to be very
clearly documented (or maybe just skipped) so we don't start fraying
with all the various vendor specific modes.
Thanks for the comments, I will skip this specific mode in next version
of this patch.
thanks
-john
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html