Add initial device trees for UDOO Neo Basic, Extended and Full boards:
* Serial console is enabled, other serial ports are prepared.
* I2C based PMIC is enabled.
* Ethernet is enabled for Basic and Full.
* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
* Both user LEDs are enabled, with the orange one reserved for the M4
and with the SD card as default trigger for the red LED.
The decision on a board compatible string is deferred to later.
Cc: Ettore Chimenti <ettore.chimenti@xxxxxxxx>
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
v1 -> v2:
* Dropped iomuxc imx6sx-udoo-neo subnode (Uwe)
* Reordered status property (Shawn)
* Used vmmc-supply and dropped always-on (Shawn)
* Fixed fec1 reset gpio (Uwe)
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts | 69 ++++++
arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts | 54 +++++
arch/arm/boot/dts/imx6sx-udoo-neo-full.dts | 69 ++++++
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 293 +++++++++++++++++++++++++
5 files changed, 489 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index befcd2619902..259117a97f28 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -416,7 +416,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sabreauto.dtb \
imx6sx-sdb-reva.dtb \
imx6sx-sdb-sai.dtb \
- imx6sx-sdb.dtb
+ imx6sx-sdb.dtb \
+ imx6sx-udoo-neo-basic.dtb \
+ imx6sx-udoo-neo-extended.dtb \
+ imx6sx-udoo-neo-full.dtb
dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-14x14-evk.dtb \
imx6ul-geam-kit.dtb \
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
new file mode 100644
index 000000000000..0b888789efc6
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+ model = "UDOO Neo Basic";
+ compatible = "fsl,imx6sx";
+
+ memory {
+ reg = <0x80000000 0x20000000>;
+ };
+};
+
+&fec1 {
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
new file mode 100644
index 000000000000..d6fdd17cd3ac
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+ model = "UDOO Neo Extended";
+ compatible = "fsl,imx6sx";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
new file mode 100644
index 000000000000..d8c3577c9dd5
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
@@ -0,0 +1,69 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6sx-udoo-neo.dtsi"
+
+/ {
+ model = "UDOO Neo Full";
+ compatible = "fsl,imx6sx";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
+&fec1 {
+ phy-handle = <ðphy1>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy1: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
new file mode 100644
index 000000000000..314d25b15641
--- /dev/null
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -0,0 +1,293 @@
+/*
+ * Copyright (c) 2016 Andreas Färber
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "imx6sx.dtsi"
+
+/ {
+ compatible = "fsl,imx6sx";
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ red {
+ label = "udoo-neo:red:mmc";
+ gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+
+ orange {
+ label = "udoo-neo:orange:user";
+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ sdio_pwr_reg: sd-gpio-regulator {
+ compatible = "regulator-fixed";
+ gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-name = "SDIO_PWR";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+};
+
+&cpu0 {
+ arm-supply = <&sw1a_reg>;
+ soc-supply = <&sw1c_reg>;
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet1>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ pmic: pmic@08 {
+ compatible = "fsl,pfuze3000";
+ reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1a {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1b {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1475000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1850000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1650000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen2_reg: vldo2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vccsd {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen4_reg: v33 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl_enet1: enet1grp {
+ fsl,pins =
+ <MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0xa0b1>,
+ <MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1>,
+ <MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1>,
+ <MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1>,
+ <MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1>,
+ <MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1>,
+
+ <MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x3081>,
+ <MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x3081>,
+ <MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081>,
+ <MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081>,
+ <MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081>,
+ <MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x3081>,
+
+ <MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1>,
+ <MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1>;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1>,
+ <MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1>;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins =
+ <MX6SX_PAD_GPIO1_IO06__UART2_TX 0x1b0b1>,
+ <MX6SX_PAD_GPIO1_IO07__UART2_RX 0x1b0b1>;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins =
+ <MX6SX_PAD_SD4_DATA4__UART5_RX 0x1b0b1>,
+ <MX6SX_PAD_SD4_DATA5__UART5_TX 0x1b0b1>;
+ };
+
+ pinctrl_uart6: uart6grp {
+ fsl,pins =
+ <MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA04__UART6_RX 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA05__UART6_TX 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x1b0b1>,
+ <MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x1b0b1>;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins =
+ <MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059>,
+ <MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059>,
+ <MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059>,
+ <MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059>,
+ <MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059>,
+ <MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059>,
+ <MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x17059>; /* CD */
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+/* Cortex-M4 serial */
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "disabled";
+};
+
+/* Arduino serial */
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "disabled";
+};
+
+&uart6 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart6>;
+ uart-has-rtscts;
+ status = "disabled";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ vmmc-supply = <&sdio_pwr_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
+ no-1-8-v;
+ keep-power-in-suspend;
+ wakeup-source;
+ status = "okay";
+};
--
2.6.6
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
