On Mon, 10 Oct 2016, Thor Thayer wrote:
> Hi Lee,
>
> On 06/10/2016 09:47 AM, Lee Jones wrote:
> > On Thu, 02 Jun 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> >
> > > From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> > >
> > > The Altera Arria10 Devkit System Resource chip is a Multi-Function
> > > Device with a GPIO expander.
> > >
> > > This patch adds documentation for the Altera A10-SR DT bindings.
> > >
> > > Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> > > ---
> > > v2 Addition of IRQ controller bindings.
> > > Removal of hw_mon sub-device.
> > > ---
> > > .../devicetree/bindings/mfd/altera-a10sr.txt | 46 ++++++++++++++++++++
> > > 1 file changed, 46 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> >
> > Applied, thanks.
>
> For some reason, I'm not seeing this in the 4.8 tree with the other mfd
> additions. Do I need to submit it to a different tree?
No, it looks like this one was dropped for some reason.
Reapplying now.
> > > diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> > > new file mode 100644
> > > index 0000000..ea151f2
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> > > @@ -0,0 +1,46 @@
> > > +* Altera Arria10 Development Kit System Resource Chip
> > > +
> > > +Required parent device properties:
> > > +- compatible : "altr,a10sr"
> > > +- spi-max-frequency : Maximum SPI frequency.
> > > +- reg : The SPI Chip Select address for the Arria10
> > > + System Resource chip
> > > +- interrupt-parent : The parent interrupt controller.
> > > +- interrupts : The interrupt line the device is connected to.
> > > +- interrupt-controller : Marks the device node as an interrupt controller.
> > > +- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
> > > + The first cell is the IRQ number.
> > > + The second cell is the flags, encoded as trigger
> > > + masks from ../interrupt-controller/interrupts.txt.
> > > +
> > > +The A10SR consists of these sub-devices:
> > > +
> > > +Device Description
> > > +------ ----------
> > > +a10sr_gpio GPIO Controller
> > > +
> > > +Arria10 GPIO
> > > +Required Properties:
> > > +- compatible : Should be "altr,a10sr-gpio"
> > > +- gpio-controller : Marks the device node as a GPIO Controller.
> > > +- #gpio-cells : Should be two. The first cell is the pin number and
> > > + the second cell is used to specify flags.
> > > + See ../gpio/gpio.txt for more information.
> > > +
> > > +Example:
> > > +
> > > + resource-manager@0 {
> > > + compatible = "altr,a10sr";
> > > + reg = <0>;
> > > + spi-max-frequency = <100000>;
> > > + interrupt-parent = <&portb>;
> > > + interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
> > > + interrupt-controller;
> > > + #interrupt-cells = <2>;
> > > +
> > > + a10sr_gpio: gpio-controller {
> > > + compatible = "altr,a10sr-gpio";
> > > + gpio-controller;
> > > + #gpio-cells = <2>;
> > > + };
> > > + };
> >
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
