Hi Lee,
On 06/10/2016 09:47 AM, Lee Jones wrote:
On Thu, 02 Jun 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
The Altera Arria10 Devkit System Resource chip is a Multi-Function
Device with a GPIO expander.
This patch adds documentation for the Altera A10-SR DT bindings.
Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
v2 Addition of IRQ controller bindings.
Removal of hw_mon sub-device.
---
.../devicetree/bindings/mfd/altera-a10sr.txt | 46 ++++++++++++++++++++
1 file changed, 46 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/altera-a10sr.txt
Applied, thanks.
For some reason, I'm not seeing this in the 4.8 tree with the other mfd
additions. Do I need to submit it to a different tree?
Thanks,
Thor
diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
new file mode 100644
index 0000000..ea151f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -0,0 +1,46 @@
+* Altera Arria10 Development Kit System Resource Chip
+
+Required parent device properties:
+- compatible : "altr,a10sr"
+- spi-max-frequency : Maximum SPI frequency.
+- reg : The SPI Chip Select address for the Arria10
+ System Resource chip
+- interrupt-parent : The parent interrupt controller.
+- interrupts : The interrupt line the device is connected to.
+- interrupt-controller : Marks the device node as an interrupt controller.
+- #interrupt-cells : The number of cells to describe an IRQ, should be 2.
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as trigger
+ masks from ../interrupt-controller/interrupts.txt.
+
+The A10SR consists of these sub-devices:
+
+Device Description
+------ ----------
+a10sr_gpio GPIO Controller
+
+Arria10 GPIO
+Required Properties:
+- compatible : Should be "altr,a10sr-gpio"
+- gpio-controller : Marks the device node as a GPIO Controller.
+- #gpio-cells : Should be two. The first cell is the pin number and
+ the second cell is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+
+Example:
+
+ resource-manager@0 {
+ compatible = "altr,a10sr";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+ interrupt-parent = <&portb>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ a10sr_gpio: gpio-controller {
+ compatible = "altr,a10sr-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html