[PATCH v3 3/6] pwm: imx: support output polarity inversion

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Lothar Wassmann <LW@xxxxxxxxxxxxxxxxxxx>

The i.MX pwm unit on i.MX27 and newer SoCs provides a configurable output
polarity. This patch adds support to utilize this feature where available.

Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxxxx>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@xxxxxxxxxxx>
Acked-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Reviewed-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/pwm/imx-pwm.txt |  6 +--
 drivers/pwm/pwm-imx.c                             | 51 +++++++++++++++++++++--
 2 files changed, 51 insertions(+), 6 deletions(-)

diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
index e00c2e9..c61bdf8 100644
--- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt
+++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt
@@ -6,8 +6,8 @@ Required properties:
   - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1
   - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27
 - reg: physical base address and length of the controller's registers
-- #pwm-cells: should be 2. See pwm.txt in this directory for a description of
-  the cells format.
+- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.txt
+  in this directory for a description of the cells format.
 - clocks : Clock specifiers for both ipg and per clocks.
 - clock-names : Clock names should include both "ipg" and "per"
 See the clock consumer binding,
@@ -17,7 +17,7 @@ See the clock consumer binding,
 Example:
 
 pwm1: pwm@53fb4000 {
-	#pwm-cells = <2>;
+	#pwm-cells = <3>;
 	compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
 	reg = <0x53fb4000 0x4000>;
 	clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
index d600fd5..c37d223 100644
--- a/drivers/pwm/pwm-imx.c
+++ b/drivers/pwm/pwm-imx.c
@@ -38,6 +38,7 @@
 #define MX3_PWMCR_DOZEEN		(1 << 24)
 #define MX3_PWMCR_WAITEN		(1 << 23)
 #define MX3_PWMCR_DBGEN			(1 << 22)
+#define MX3_PWMCR_POUTC			(1 << 18)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH	(2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG		(1 << 16)
 #define MX3_PWMCR_SWR			(1 << 3)
@@ -180,6 +181,9 @@ static int imx_pwm_config_v2(struct pwm_chip *chip,
 	if (enable)
 		cr |= MX3_PWMCR_EN;
 
+	if (pwm->args.polarity == PWM_POLARITY_INVERSED)
+		cr |= MX3_PWMCR_POUTC;
+
 	writel(cr, imx->mmio_base + MX3_PWMCR);
 
 	return 0;
@@ -240,27 +244,62 @@ static void imx_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
 	clk_disable_unprepare(imx->clk_per);
 }
 
-static struct pwm_ops imx_pwm_ops = {
+static int imx_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
+				enum pwm_polarity polarity)
+{
+	struct imx_chip *imx = to_imx_chip(chip);
+	u32 val;
+
+	if (polarity == pwm->args.polarity)
+		return 0;
+
+	val = readl(imx->mmio_base + MX3_PWMCR);
+
+	if (polarity == PWM_POLARITY_INVERSED)
+		val |= MX3_PWMCR_POUTC;
+	else
+		val &= ~MX3_PWMCR_POUTC;
+
+	writel(val, imx->mmio_base + MX3_PWMCR);
+
+	dev_dbg(imx->chip.dev, "%s: polarity set to %s\n", __func__,
+		polarity == PWM_POLARITY_INVERSED ? "inverted" : "normal");
+
+	return 0;
+}
+
+static struct pwm_ops imx_pwm_ops_v1 = {
 	.enable = imx_pwm_enable,
 	.disable = imx_pwm_disable,
 	.config = imx_pwm_config,
 	.owner = THIS_MODULE,
 };
 
+static struct pwm_ops imx_pwm_ops_v2 = {
+	.enable = imx_pwm_enable,
+	.disable = imx_pwm_disable,
+	.set_polarity = imx_pwm_set_polarity,
+	.config = imx_pwm_config,
+	.owner = THIS_MODULE,
+};
+
 struct imx_pwm_data {
 	int (*config)(struct pwm_chip *chip,
 		struct pwm_device *pwm, int duty_ns, int period_ns);
 	void (*set_enable)(struct pwm_chip *chip, bool enable);
+	struct pwm_ops *pwm_ops;
 };
 
 static struct imx_pwm_data imx_pwm_data_v1 = {
 	.config = imx_pwm_config_v1,
 	.set_enable = imx_pwm_set_enable_v1,
+	.pwm_ops = &imx_pwm_ops_v1,
 };
 
 static struct imx_pwm_data imx_pwm_data_v2 = {
 	.config = imx_pwm_config_v2,
 	.set_enable = imx_pwm_set_enable_v2,
+	.pwm_ops = &imx_pwm_ops_v2,
 };
 
 static const struct of_device_id imx_pwm_dt_ids[] = {
@@ -282,6 +321,8 @@ static int imx_pwm_probe(struct platform_device *pdev)
 	if (!of_id)
 		return -ENODEV;
 
+	data = of_id->data;
+
 	imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
 	if (imx == NULL)
 		return -ENOMEM;
@@ -300,18 +341,22 @@ static int imx_pwm_probe(struct platform_device *pdev)
 		return PTR_ERR(imx->clk_ipg);
 	}
 
-	imx->chip.ops = &imx_pwm_ops;
+	imx->chip.ops = data->pwm_ops;
 	imx->chip.dev = &pdev->dev;
 	imx->chip.base = -1;
 	imx->chip.npwm = 1;
 	imx->chip.can_sleep = true;
+	if (data->pwm_ops->set_polarity) {
+		dev_dbg(&pdev->dev, "PWM supports output inversion\n");
+		imx->chip.of_xlate = of_pwm_xlate_with_flags;
+		imx->chip.of_pwm_n_cells = 3;
+	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	imx->mmio_base = devm_ioremap_resource(&pdev->dev, r);
 	if (IS_ERR(imx->mmio_base))
 		return PTR_ERR(imx->mmio_base);
 
-	data = of_id->data;
 	imx->config = data->config;
 	imx->set_enable = data->set_enable;
 
-- 
2.10.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux