From: Guenter Roeck <groeck@xxxxxxxxxxx>
Extended CPLD only exists on certain boards (SPMB) and by itself requires
an MFD driver, since it supports its own interrupts and sub-devices.
It also needs to provide support for SIB hotplug. It is cleaner and easier
to maintain it as separate driver.
Signed-off-by: Georgi Vlaev <gvlaev@xxxxxxxxxxx>
Signed-off-by: Guenter Roeck <groeck@xxxxxxxxxxx>
Signed-off-by: JawaharBalaji Thirumalaisamy <jawaharb@xxxxxxxxxxx>
Signed-off-by: Tom Kavanagh <tkavanagh@xxxxxxxxxxx>
[Ported from Juniper kernel]
Signed-off-by: Pantelis Antoniou <pantelis.antoniou@xxxxxxxxxxxx>
---
drivers/mfd/Kconfig | 13 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/ptxpmb-ext-cpld-core.c | 221 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/ptxpmb_ext_cpld.h | 42 +++++++
4 files changed, 277 insertions(+)
create mode 100644 drivers/mfd/ptxpmb-ext-cpld-core.c
create mode 100644 include/linux/mfd/ptxpmb_ext_cpld.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 75b46a1..7e1fa14 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1371,6 +1371,19 @@ config MFD_JUNIPER_SAM
This driver can be built as a module. If built as a module it will be
called "sam-core"
+config MFD_JUNIPER_EXT_CPLD
+ tristate "Juniper PTX PMB Extended CPLD"
+ depends on PTXPMB_COMMON
+ default y if PTXPMB_COMMON
+ select MFD_CORE
+ help
+ Select this to enable the PTX PMB Extended CPLD multi-function kernel
+ driver for the applicable Juniper platforms.
+
+ This driver can be built as a module. If built as a module it will be
+ called "ptxpmb-ext-cpld"
+
+
config MFD_TWL4030_AUDIO
bool "TI TWL4030 Audio"
depends on TWL4030_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 71a8ba6..da94482 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -150,6 +150,7 @@ obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_MFD_JUNIPER_CPLD) += ptxpmb-cpld-core.o
obj-$(CONFIG_MFD_JUNIPER_SAM) += sam-core.o
+obj-$(CONFIG_MFD_JUNIPER_EXT_CPLD) += ptxpmb-ext-cpld-core.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
# ab8500-core need to come after db8500-prcmu (which provides the channel)
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
diff --git a/drivers/mfd/ptxpmb-ext-cpld-core.c b/drivers/mfd/ptxpmb-ext-cpld-core.c
new file mode 100644
index 0000000..a1b1793
--- /dev/null
+++ b/drivers/mfd/ptxpmb-ext-cpld-core.c
@@ -0,0 +1,221 @@
+/*
+ * Juniper PTX PMB Extended CPLD multi-function core driver
+ *
+ * Copyright (C) 2012 Juniper Networks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/wait.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/spinlock.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/mfd/ptxpmb_ext_cpld.h>
+#include <linux/jnx/jnx-subsys.h>
+
+struct pmb_ext_cpld_core {
+ struct device *dev;
+ struct pmb_boot_cpld_ext __iomem *cpld;
+ spinlock_t lock;
+ int irq0, irq1;
+ wait_queue_head_t wqh;
+};
+
+static irqreturn_t pmb_ext_cpld_core_interrupt(int irq, void *dev_data)
+{
+ struct pmb_ext_cpld_core *cpld = dev_data;
+ unsigned char __iomem *data;
+ int i;
+ u8 buffer[48];
+
+ dev_info(cpld->dev, "interrupt %d sib presence=0x%x irq status=0x%x\n",
+ irq, ioread16(&cpld->cpld->sib_presence),
+ ioread16(&cpld->cpld->sib_irq_status));
+
+ data = (u8 *)cpld->cpld;
+ for (i = 0; i < 48; i++)
+ buffer[i] = ioread8(data + i);
+
+ print_hex_dump(KERN_INFO, dev_name(cpld->dev), DUMP_PREFIX_OFFSET,
+ 16, 4, buffer, 48, false);
+
+ spin_lock(&cpld->wqh.lock);
+
+ /* clear interrupt, wake up any handlers */
+ wake_up_locked(&cpld->wqh);
+
+ spin_unlock(&cpld->wqh.lock);
+
+ return IRQ_HANDLED;
+}
+
+static ssize_t show_sib_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct pmb_ext_cpld_core *cpld = dev_get_drvdata(dev);
+
+ WARN_ONCE(1,
+ "sib_status is deprecated and should no longer be used for presence detection\n");
+
+ return sprintf(buf, "0x%04x\n",
+ ioread16(&cpld->cpld->sib_presence));
+}
+
+static DEVICE_ATTR(sib_status, S_IRUGO, show_sib_status, NULL);
+
+static struct resource pmb_ext_cpld_resources[] = {
+ {
+ .start = 0,
+ .end = sizeof(struct pmb_boot_cpld_ext) - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct mfd_cell pmb_ext_cpld_cells[] = {
+ {
+ .name = "gpio-ptxpmb-ext-cpld",
+ .num_resources = ARRAY_SIZE(pmb_ext_cpld_resources),
+ .resources = pmb_ext_cpld_resources,
+ .of_compatible = "jnx,gpio-ptxpmb-ext-cpld",
+ },
+};
+
+static int pmb_ext_cpld_core_probe(struct platform_device *pdev)
+{
+ static struct pmb_ext_cpld_core *cpld;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int error;
+ u16 asid;
+
+ cpld = devm_kzalloc(dev, sizeof(*cpld), GFP_KERNEL);
+ if (!cpld)
+ return -ENOMEM;
+
+ cpld->dev = dev;
+ dev_set_drvdata(dev, cpld);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ cpld->cpld = devm_ioremap_resource(dev, res);
+ if (IS_ERR(cpld->cpld))
+ return PTR_ERR(cpld->cpld);
+
+ cpld->irq0 = platform_get_irq(pdev, 0);
+ if (cpld->irq0 >= 0) {
+ error = devm_request_threaded_irq(dev, cpld->irq0, NULL,
+ pmb_ext_cpld_core_interrupt,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ dev_name(dev), cpld);
+ if (error < 0)
+ return error;
+ }
+
+ cpld->irq1 = platform_get_irq(pdev, 1);
+ if (cpld->irq1 >= 0) {
+ error = devm_request_threaded_irq(dev, cpld->irq1, NULL,
+ pmb_ext_cpld_core_interrupt,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ dev_name(dev), cpld);
+ if (error < 0)
+ return error;
+ }
+
+ spin_lock_init(&cpld->lock);
+ init_waitqueue_head(&cpld->wqh);
+
+ asid = ioread16be(&cpld->cpld->cb_assembly_id);
+
+ dev_info(dev, "Ext CPLD rev %u.%u CB asy 0x%x CB rev %u.%u\n",
+ ioread8(&cpld->cpld->major_rev),
+ ioread8(&cpld->cpld->minor_rev),
+ asid,
+ ioread8(&cpld->cpld->cb_major_version),
+ ioread8(&cpld->cpld->cb_minor_version));
+
+ dev_info(dev, "SIB status=0x%x SIB irq status=0x%x\n",
+ ioread16(&cpld->cpld->sib_presence),
+ ioread16(&cpld->cpld->sib_irq_status));
+
+ error = device_create_file(dev, &dev_attr_sib_status);
+ if (error)
+ return error;
+ error = mfd_add_devices(dev, pdev->id, pmb_ext_cpld_cells,
+ ARRAY_SIZE(pmb_ext_cpld_cells), res,
+ 0, NULL);
+ if (error < 0)
+ goto abort;
+
+ iowrite16(0xffff, &cpld->cpld->sib_presence_irq_en);
+ iowrite16(0xffff, &cpld->cpld->sib_irq_en);
+
+ return 0;
+
+abort:
+ device_remove_file(dev, &dev_attr_sib_status);
+ return error;
+}
+
+static int pmb_ext_cpld_core_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+ device_remove_file(&pdev->dev, &dev_attr_sib_status);
+ return 0;
+}
+
+static const struct of_device_id pmb_ext_cpld_of_ids[] = {
+ { .compatible = "jnx,ptxpmb-ext-cpld" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pmb_ext_cpld_of_ids);
+
+static struct platform_driver pmb_ext_cpld_core_driver = {
+ .probe = pmb_ext_cpld_core_probe,
+ .remove = pmb_ext_cpld_core_remove,
+ .driver = {
+ .name = "ptxpmb-ext-cpld",
+ .of_match_table = pmb_ext_cpld_of_ids,
+ .owner = THIS_MODULE,
+ }
+};
+
+static int __init pmb_ext_cpld_core_init(void)
+{
+ return platform_driver_register(&pmb_ext_cpld_core_driver);
+}
+module_init(pmb_ext_cpld_core_init);
+
+static void __exit pmb_ext_cpld_core_exit(void)
+{
+ platform_driver_unregister(&pmb_ext_cpld_core_driver);
+}
+module_exit(pmb_ext_cpld_core_exit);
+
+MODULE_DESCRIPTION("Juniper PTX PMB Extended CPLD Core Driver");
+MODULE_AUTHOR("Guenter Roeck <groeck@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ptxpmb-cpld");
diff --git a/include/linux/mfd/ptxpmb_ext_cpld.h b/include/linux/mfd/ptxpmb_ext_cpld.h
new file mode 100644
index 0000000..bac9a73
--- /dev/null
+++ b/include/linux/mfd/ptxpmb_ext_cpld.h
@@ -0,0 +1,42 @@
+/*---------------------------------------------------------------------------
+ *
+ * ptxpmb_ext_cpld_core.h
+ * Copyright (c) 2012, 2013 Juniper Networks
+ *
+ *---------------------------------------------------------------------------
+ */
+
+#ifndef PTXPMB_EXT_CPLD_CORE_H
+#define PTXPMB_EXT_CPLD_CORE_H
+
+/*
+ * Extended CPLD registers
+ */
+struct pmb_boot_cpld_ext {
+ u8 major_rev; /* 0x00 */
+ u8 minor_rev; /* 0x01 */
+ u16 sib_presence; /* 0x02 */
+ u8 unused0[4]; /* 0x04 */
+ u16 sib_presence_irq_en; /* 0x08 */
+ u8 unused1[4]; /* 0x0a */
+ u16 sib_irq_status; /* 0x0e */
+ u8 unused2[4]; /* 0x10 */
+ u16 sib_irq_en; /* 0x14 */
+ u8 unused3[4]; /* 0x16 */
+ u8 i2c_group; /* 0x1a */
+ u8 i2c_mux_sel; /* 0x1b */
+ u8 re_status; /* 0x1c */
+ u8 unused4[0x24 - 0x1d]; /* 0x1d */
+ u16 cb_assembly_id; /* 0x24 */
+ u8 cb_major_version; /* 0x26 */
+ u8 cb_minor_version; /* 0x27 */
+ u8 unused5[0x40 - 0x28]; /* 0x28 */
+ u8 spare_a; /* 0x40 */
+ u8 spare_b; /* 0x41 */
+ u8 spare_c; /* 0x42 */
+ u8 spare_d; /* 0x43 */
+ u8 spare_e; /* 0x44 */
+ u8 unused6[0x3ff - 0x45]; /* 0x45 */
+};
+
+#endif /* PTXPMB_EXT_CPLD_CORE_H */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
