This series is based on clk-next, add clock and reset controller support for Mediatek MT2701. Since some patches in v11 had been applied into clk-next, they were not included in v13 series. changes since v12: - Rebase to clk-next. - Use CLK_OF_DECLARE_DRIVER() instead of CLK_OF_DECLARE(). - Use dev_* and devm_* APIs instead of pr_* and ioremap(). - Refine init functions. Share error messages in common probe(). - Fix null pointer checking for clk_data. changes since v11: - Rebase to clk-next. - Return error code from probe() if clock registration fail. changes since v10: - Remove COMMON_CLK dependency from clk/mediatek/Kconfig. changes since v9: - Rebase to v4.8-rc1. - Drop a fix patch of parent clock initial state. It will be replaced by a new patch from Mike/Stephen. - Replace clk.h with clk-provider.h. - Correct register settings of clocks. changes since v8: - Rebase to v4.7-rc1. - Include mt2701-resets.h in mt2701.dtsi. - Remove an unused property from apmixedsys DT node. changes since v7: - Rebase to clk-next. - Implement subsystem clocks in seperated files. - Replace critical clock enabling with CLK_IS_CRITICAL flag. - Reduce most clock registrations in CLK_OF_DECLARE(). - Remove __init and __initconst from most init fucntions and data, and replace driver registration with platform_driver_register(). - Replace some common function or variable names with unique names. - Use real clock for UARTs. changes since v6: - Rebase to v4.6-rc1. - Register subsystem clocks in probe() instead of CLK_OF_DECLARE(). - Add clocks that referred by subsystem clocks. - Fix clk_data size of apmixedsys. - Add config options for each subsystem clock provider. changes since v5: - Rebase to v4.5-rc1 and [1]. - Enable critical clocks for MT2701 - Refine dt-binding documents, add reset controller support for hifsys. changes since v4: - Rebase to v4.5-rc1. - Remove CLK_SET_RATE_PARENT from divider flags. - Add img_jpgdec_smi clock. - Move clk/mediatek/Kconfig into menu section in clk/Kconfig. changes since v3: - Change the parent of mm_mdp_bls_26m from clk26m to pwm_sel. changes since v2: - Fix ethsys definition. - Replace read-modify-write with regmap_update_bits() in clock operations. - Move mt2701-resets.h to include/dt-bindings/reset/. - Add hifsys reset patch from John Crispin. changes since v1: - Document MT2701 compatible strings. [1] https://patchwork.kernel.org/patch/8147901/ Erin Lo (1): arm: dts: mt2701: Use real clock for UARTs James Liao (1): arm: dts: mt2701: Add clock controller device nodes Shunli Wang (2): clk: mediatek: Add MT2701 clock support reset: mediatek: Add MT2701 reset driver arch/arm/boot/dts/mt2701.dtsi | 50 +- drivers/clk/mediatek/Kconfig | 43 ++ drivers/clk/mediatek/Makefile | 7 + drivers/clk/mediatek/clk-gate.c | 52 ++ drivers/clk/mediatek/clk-gate.h | 2 + drivers/clk/mediatek/clk-mt2701-bdp.c | 148 +++++ drivers/clk/mediatek/clk-mt2701-eth.c | 90 +++ drivers/clk/mediatek/clk-mt2701-hif.c | 91 +++ drivers/clk/mediatek/clk-mt2701-img.c | 90 +++ drivers/clk/mediatek/clk-mt2701-mm.c | 133 ++++ drivers/clk/mediatek/clk-mt2701-vdec.c | 101 +++ drivers/clk/mediatek/clk-mt2701.c | 1054 ++++++++++++++++++++++++++++++++ drivers/clk/mediatek/clk-mtk.c | 40 ++ drivers/clk/mediatek/clk-mtk.h | 41 +- drivers/clk/mediatek/clk-pll.c | 1 + 15 files changed, 1933 insertions(+), 10 deletions(-) create mode 100644 drivers/clk/mediatek/clk-mt2701-bdp.c create mode 100644 drivers/clk/mediatek/clk-mt2701-eth.c create mode 100644 drivers/clk/mediatek/clk-mt2701-hif.c create mode 100644 drivers/clk/mediatek/clk-mt2701-img.c create mode 100644 drivers/clk/mediatek/clk-mt2701-mm.c create mode 100644 drivers/clk/mediatek/clk-mt2701-vdec.c create mode 100644 drivers/clk/mediatek/clk-mt2701.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
