[PATCH] ARM: dts: pxa: fix gpio0 and gpio1 interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Since gpio-pxa was redesigned to differenciate gpio0, gpio1 and the
gpio-mux interrupt as in the hardware IP, the device-tree description
should be amended so that interrupts from gpio0 and gpio1 can be mapped
to consumers.

This is especially true on lubbock and mainstone devices where gpio0 is
multiplexed on pxa_cplds for ethernet, sa1111, usb udc, and other
devices.

Signed-off-by: Robert Jarzmik <robert.jarzmik@xxxxxxx>
---
 arch/arm/boot/dts/pxa2xx.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi
index 3ff077ca4400..e4ebcde17837 100644
--- a/arch/arm/boot/dts/pxa2xx.dtsi
+++ b/arch/arm/boot/dts/pxa2xx.dtsi
@@ -54,8 +54,8 @@
 			reg = <0x40e00000 0x10000>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
-			interrupts = <10>;
-			interrupt-names = "gpio_mux";
+			interrupts = <8>, <9>, <10>;
+			interrupt-names = "gpio0", "gpio1", "gpio_mux";
 			interrupt-controller;
 			#interrupt-cells = <0x2>;
 			ranges;
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux