On Fri, Sep 23, 2016 at 02:50:27PM +0530, Archit Taneja wrote: > Add the regulator supply properties needed by ADV7511 and ADV7533. The > regulator names are named after the pin names, except for DVDD_3V on > ADV7511, which is left v3p3 to have the same name as it's on ADV7533. > > ADV7511 has a BGVDD pin for which the voltage to be configured isn't > clear. This needs to be updated in the document later. > > The regulators are specified as optional properties since there can > be boards which have a fixed supply directly routed to the pins, and > these may not be modelled as regulator supplies. > > Cc: Rob Herring <robh@xxxxxxxxxx> > Cc: devicetree@xxxxxxxxxxxxxxx > Signed-off-by: Archit Taneja <architt@xxxxxxxxxxxxxx> > --- > v2: > - Specify regulator supplies for ADV7511 too. > - Have separate supply entries for AVDD, DVDD, PVDD, A2VDD pins. > - Add additional BGVDD supply for ADV7511. > > .../devicetree/bindings/display/bridge/adi,adv7511.txt | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) Acked-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html