On Mon, 2016-09-05 at 09:44 +0800, HS Liao wrote: > Hi, > > This is Mediatek MT8173 Command Queue(CMDQ) driver. The CMDQ is used > to help write registers with critical time limitation, such as > updating display configuration during the vblank. It controls Global > Command Engine (GCE) hardware to achieve this requirement. > > These patches have a build dependency on top of v4.8-rc1. > > Changes since v13: > - move to mailbox folder > - simplify cmdq_thread_is_in_wfe > > Best regards, > HS Liao > > HS Liao (4): > dt-bindings: soc: Add documentation for the MediaTek GCE unit > CMDQ: Mediatek CMDQ driver > arm64: dts: mt8173: Add GCE node > CMDQ: save more energy in idle > > .../devicetree/bindings/mailbox/mtk-gce.txt | 43 + > arch/arm64/boot/dts/mediatek/mt8173.dtsi | 10 + > drivers/mailbox/Kconfig | 10 + > drivers/mailbox/Makefile | 2 + > drivers/mailbox/mtk-cmdq.c | 965 +++++++++++++++++++++ > include/linux/mailbox/mtk-cmdq.h | 180 ++++ > 6 files changed, 1210 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/mtk-gce.txt > create mode 100644 drivers/mailbox/mtk-cmdq.c > create mode 100644 include/linux/mailbox/mtk-cmdq.h > Hi Jassi, Sorry to disturb you. Do you have any further comment on CMDQ v14? Thanks. HS -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
