[PATCH 0/2] dts: arm64: db820c: adds support to pmic pins

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Andy/Linus W,

This patchset adds support to pm8994 gpios/mpps on db820c board.
DB820c board Low Speed expansion GPIO_F is connected to PM8994_GPIO5

Its better if we take this patchset from single tree, as dts patch has
dependency on the dt-bindings include file.

Without this patchset GPIO_F on LS expansion would be at 2.7v
instead of 1.8v.

Thanks,
srini

Srinivas Kandagatla (2):
  pinctrl: pm8994: add pad voltage regulator defines
  dts: arm64: db820c: add pmic pins specific dts file

 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi | 15 +++++++++++++++
 arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi           |  2 ++
 include/dt-bindings/pinctrl/qcom,pmic-gpio.h           |  4 ++++
 include/dt-bindings/pinctrl/qcom,pmic-mpp.h            |  6 ++++++
 4 files changed, 27 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/apq8096-db820c-pmic-pins.dtsi

-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux