On Wed, 8 Jun 2016 17:04:21 +0200 Boris Brezillon <boris.brezillon@xxxxxxxxxxxxxxxxxx> wrote: > Hello, > > Sorry for the noise, but I forgot to add DT maintainers in Cc. > > This series aims at standardizing a feature already supported by > some NAND controller drivers: setting the maximum ECC strength > based on the OOB area size instead of using the ECC strength/step_size > information retrieved from the DT or NAND detection code. > > This is particularly useful when the NAND device is used in by a > FS/wear-leveling layer that is not using the OOB area at all (this is > the case of UBI). > > Note that drivers already implementing this kind of logic are not > converted to the new approach (because of backward compatibility > concern), but new drivers or drivers that do not already implement > this 'ECC maximization' logic are encouraged to do it. Applied. > > Regards, > > Boris > > Boris Brezillon (3): > mtd: nand: Add an option to maximize the ECC strength > mtd: nand: Support maximizing ECC when using software BCH > mtd: nand: sunxi: Support ECC maximization > > Documentation/devicetree/bindings/mtd/nand.txt | 9 ++++++++ > drivers/mtd/nand/nand_base.c | 23 ++++++++++++++++++++ > drivers/mtd/nand/sunxi_nand.c | 29 ++++++++++++++++++++++++++ > include/linux/mtd/nand.h | 1 + > 4 files changed, 62 insertions(+) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
