On some platforms, root port doesn't support MSI/MSI-X/INTx in RC mode.
When chip support the aer interrupt with none MSI/MSI-X/INTx mode,
maybe there is interrupt line for aer pme etc. Search the interrupt
number in the fdt file. Then fixup the dev->irq with it.
Signed-off-by: Po Liu <po.liu@xxxxxxx>
---
changes for v5:
- Add clear 'aer' interrup-names description
.../devicetree/bindings/pci/layerscape-pci.txt | 11 +++++---
drivers/pci/pcie/portdrv_core.c | 31 +++++++++++++++++++---
2 files changed, 35 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
index 41e9f55..101d0a7 100644
--- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
+++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
@@ -18,8 +18,10 @@ Required properties:
- reg: base addresses and lengths of the PCIe controller
- interrupts: A list of interrupt outputs of the controller. Must contain an
entry for each entry in the interrupt-names property.
-- interrupt-names: Must include the following entries:
- "intr": The interrupt that is asserted for controller interrupts
+- interrupt-names: It may be include the following entries:
+ "aer": The interrupt that is asserted for aer interrupt
+ "pme": The interrupt that is asserted for pme interrupt
+ ......
- fsl,pcie-scfg: Must include two entries.
The first entry must be a link to the SCFG device node
The second entry must be '0' or '1' based on physical PCIe controller index.
@@ -35,8 +37,9 @@ Example:
reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */
0x40 0x00000000 0x0 0x00002000>; /* configuration space */
reg-names = "regs", "config";
- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
- interrupt-names = "intr";
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>, /* aer interrupt */
+ <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* pme interrupt */
+ interrupt-names = "aer", "pme";
fsl,pcie-scfg = <&scfg 0>;
#address-cells = <3>;
#size-cells = <2>;
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index e9270b4..7c4943d 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/pcieport_if.h>
#include <linux/aer.h>
+#include <linux/of_irq.h>
#include "../pci.h"
#include "portdrv.h"
@@ -200,6 +201,28 @@ static int pcie_port_enable_msix(struct pci_dev *dev, int *vectors, int mask)
static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
{
int i, irq = -1;
+ int ret;
+ struct device_node *np = NULL;
+
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
+ irqs[i] = 0;
+
+ if (dev->bus->dev.of_node)
+ np = dev->bus->dev.of_node;
+
+ /* If root port doesn't support MSI/MSI-X/INTx in RC mode,
+ * request irq for aer
+ */
+ if (IS_ENABLED(CONFIG_OF_IRQ) && np &&
+ (mask & PCIE_PORT_SERVICE_PME)) {
+ ret = of_irq_get_byname(np, "aer");
+ if (ret > 0) {
+ irqs[PCIE_PORT_SERVICE_AER_SHIFT] = ret;
+ if (dev->irq)
+ irq = dev->irq;
+ goto no_msi;
+ }
+ }
/*
* If MSI cannot be used for PCIe PME or hotplug, we have to use
@@ -225,11 +248,13 @@ static int init_service_irqs(struct pci_dev *dev, int *irqs, int mask)
irq = dev->irq;
no_msi:
- for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++)
- irqs[i] = irq;
+ for (i = 0; i < PCIE_PORT_DEVICE_MAXSERVICES; i++) {
+ if (!irqs[i])
+ irqs[i] = irq;
+ }
irqs[PCIE_PORT_SERVICE_VC_SHIFT] = -1;
- if (irq < 0)
+ if (irq < 0 && irqs[PCIE_PORT_SERVICE_AER_SHIFT] < 0)
return -ENODEV;
return 0;
}
--
2.1.0.27.g96db324
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
