Introduce support for the Murata ZPA2326 pressure and temperature sensor. Also bring in resource managed versions for triggered buffer setup helpers and trigger registration which the above mentioned driver depends on. Driver features : * I2C and SPI buses * interrupt and polling based operations * direct, external and internal triggered buffering IIO modes * hardware sampling frequency handling * trigger consumers notification (plugged on interrupt) * runtime and system power states Changes since v3 : * drop first 2 patches since applied onto testing branch * spelling / syntax corrections * disable build of verbose message by default. * get rid of useless zpa_iio2slave() and zpa_iio2priv() macros * rename "slave" variables to "parent" * add missing blank lines * remove useless registers read/write wrappers * rename zpa_disable_device() to zpa_sleep() * reword comments to specify interrupt line <= 0 are invalid * replace zpa2326_claim_direct_mode()/zpa2326_release_direct_mode() by equivalent inline statements * always return IRQ_HANDLED in trigger handlers * remove useless lock from zpa2326_get_frequency() * probing reworked * rename resource managed related init functions * don't init variables with non trivial function calls * replace exotic INDIO_BUFFER_SOFTWARE handling with traditional trigger driven acquisition Changes since v2 : * add missing vref-supply property into DT bindings doc * kerneldoc'ify comments * rename return code variables * compute channel scaling and offset using IIO_VAL_FRACTIONAL for enhanced readability * replace legacy IIO_DEV_ATTR_SAMP_FREQ macro by channel info_mask_shared_by_all mechanism Changes since v1 : * cosmetic and spelling corrections * remove useless header * remove useless u8 cast from register macro definitions * fix uninitialized pressure word for continuous sampling operation * rework of zpa_dequeue_pressure error handling flow for enhanced readability * merge zpa_acknowledge_irq() into zpa_handle_threaded_irq() for enhanced readability * remove useless pm_runtime_mark_last_busy() invocation * remove useless channel initializers * add VRef regulator support * switch to regmap based bus operations (save ~100 lines of code) * make symbol prefixes consistent with source file name (zpa_ -> zpa2326_) * get rid of BUG() usage * protect sampling frequency reads from userspace with mutex * remove DEBUG macro (rely on dynamic debug or a futur DEBUG Kconfig option defined at IIO level) * rename ZPA2326_CONVERSION_TIMEOUT macros to ZPA2326_CONVERSION_JIFFIES * simplify runtime power management error handling * rework ring setup operations for better separation of concerns * fix module removal / devm_iio_device_register() race condition * factor out hardware detection sequence Regards, gregor. Gregor Boirie (1): iio:pressure: initial zpa2326 barometer support .../devicetree/bindings/iio/pressure/zpa2326.txt | 25 + drivers/iio/pressure/Kconfig | 35 + drivers/iio/pressure/Makefile | 3 + drivers/iio/pressure/zpa2326.c | 1829 ++++++++++++++++++++ drivers/iio/pressure/zpa2326.h | 90 + drivers/iio/pressure/zpa2326_i2c.c | 99 ++ drivers/iio/pressure/zpa2326_spi.c | 103 ++ 7 files changed, 2184 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/pressure/zpa2326.txt create mode 100644 drivers/iio/pressure/zpa2326.c create mode 100644 drivers/iio/pressure/zpa2326.h create mode 100644 drivers/iio/pressure/zpa2326_i2c.c create mode 100644 drivers/iio/pressure/zpa2326_spi.c -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
