Some socs have a large number of interrupts requests to service the needs of its many peripherals and subsystems. All of the interrupt requests lines from the subsystems are not needed at the same time, so they have to be muxed to the controllers appropriately. In such places a interrupt controllers are preceded by an IRQ CROSSBAR that provides flexibility in muxing the device interrupt requests to the controller inputs. This series models the peripheral interrupts that can be routed through the crossbar to the GIC as 'routable-irqs'. The routable irqs are added in a separate linear domain inside the GIC. The registered routable domain's callback are invoked as a part of the GIC's callback, which in turn should allocate a free irq line and configure the IP accordingly. So every peripheral in the dts files mentions the fixed crossbar number as its interrupt. A free gic line for that gets allocated and configured when the peripheral interrupts are mapped. The minimal crossbar driver to track and allocate free GIC lines and configure the crossbar is added here, along with the DT bindings. V5: Addressed a comment from Mark Rutland <mark.rutland@xxxxxxx>, updated tags and rebased on 3.13-rc2 V4: Addressed a couple of comments and split the DTS file updates in to a separate series. V3: Addressed few more comments from Thomas Gleixner <tglx@xxxxxxxxxxxxx> Rebased patches 3,4,5,7 which updates the DTS file on top of below branch git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt.git for_3.13/dts Rebased patches 1,2,6 on top of 3.12 mainline Updated Commit tags V2: Addressed Thomas Gleixner <tglx@xxxxxxxxxxxxx> comments and Kumar Gala <galak@xxxxxxxxxxxxxx> Split updating the DRA7.dtsi file for adding the routable-irqs Previous discussions that led to this is at https://lkml.org/lkml/2013/9/18/540 The V1,V2,V3,V4 post of these patches is at [V1] https://lkml.org/lkml/2013/9/30/283 [V2] http://www.spinics.net/lists/linux-omap/msg99540.html [V3] http://www.kernelhub.org/?msg=356470&p=2 [V4] http://www.spinics.net/lists/linux-doc/msg16726.html Sricharan R (4): DRIVERS: IRQCHIP: IRQ-GIC: Add support for routable irqs DRIVERS: IRQCHIP: CROSSBAR: Add support for Crossbar IP ARM: OMAP4+: Correct Wakeup-gen code to use physical irq number ARM: DRA: Enable Crossbar IP support for DRA7XX Documentation/devicetree/bindings/arm/gic.txt | 6 + .../devicetree/bindings/arm/omap/crossbar.txt | 27 +++ arch/arm/mach-omap2/Kconfig | 1 + arch/arm/mach-omap2/omap-wakeupgen.c | 4 +- arch/arm/mach-omap2/omap4-common.c | 2 + drivers/irqchip/Kconfig | 8 + drivers/irqchip/Makefile | 1 + drivers/irqchip/irq-crossbar.c | 208 ++++++++++++++++++++ drivers/irqchip/irq-gic.c | 81 +++++++- include/linux/irqchip/arm-gic.h | 7 +- include/linux/irqchip/irq-crossbar.h | 11 ++ 11 files changed, 343 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/omap/crossbar.txt create mode 100644 drivers/irqchip/irq-crossbar.c create mode 100644 include/linux/irqchip/irq-crossbar.h -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
