[PATCH 0/4] Add TX FIFO Threshold for Altera 16550-FIFOxx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>

Some variants of the 16550 have a programmable TX FIFO threshold that
will trigger an IRQ when the FIFO drops below the threshold. The Altera
16550 compatible soft IP supports programmable TX FIFO thresholds.

This patch series adds the tx_loadsz to the device tree. The tx_loadsz
variable is amount of data that can be loaded into the FIFO on an IRQ.

This patch series also adds support for the TX FIFO threshold registers
in the Altera 16550-FIFOxx soft IP.

Thor Thayer (4):
  Documentation: dt: serial: Add TX FIFO load size
  serial: 8250: of: Load TX FIFO Load Size from DT
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  nios2: dts: 10m50: Add tx-loadsz parameter

 Documentation/devicetree/bindings/serial/8250.txt |    1 +
 arch/nios2/boot/dts/10m50_devboard.dts            |    1 +
 drivers/tty/serial/8250/8250_of.c                 |    6 ++++
 drivers/tty/serial/8250/8250_port.c               |   36 +++++++++++++++++++++
 include/uapi/linux/serial_reg.h                   |    8 +++++
 5 files changed, 52 insertions(+)

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux