This is a router based on the mv88f5181 chipset. http://www.netgear.com/support/product/WNR854T.aspx http://wiki.openwrt.org/toh/netgear/wnr854t Signed-off-by: Jamie Lentin <jm@xxxxxxxxxxxx> --- This removes the contentious vendor partitioning scheme and goes back to the original partitioning scheme used in non-DT ports to this board. Using the same partitioning scheme should mean less surprises for someone trying to upgrade their router. The non-DT PCI setup is still here, as there are other orion5x DT boards doing very similar things, and can all be converted at the same time. The patchset in it's entirety is available at https://github.com/lentinj/linux wnr854t-support-v2 Cheers, --- .../bindings/arm/marvell/marvell,orion5x.txt | 1 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/orion5x-netgear-wnr854t.dts | 197 +++++++++++++++++++++ arch/arm/mach-orion5x/Kconfig | 6 + arch/arm/mach-orion5x/Makefile | 1 + arch/arm/mach-orion5x/board-wnr854t.c | 78 ++++++++ 6 files changed, 284 insertions(+) create mode 100644 arch/arm/boot/dts/orion5x-netgear-wnr854t.dts create mode 100644 arch/arm/mach-orion5x/board-wnr854t.c diff --git a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt index ff3c120..748a8f2 100644 --- a/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt +++ b/Documentation/devicetree/bindings/arm/marvell/marvell,orion5x.txt @@ -22,3 +22,4 @@ board. Currently known boards are: "lacie,d2-network" "marvell,rd-88f5182-nas" "maxtor,shared-storage-2" +"netgear,wnr854t" diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index faacd52..4588b3c 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -584,6 +584,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \ orion5x-linkstation-lswtgl.dtb \ orion5x-lswsgl.dtb \ orion5x-maxtor-shared-storage-2.dtb \ + orion5x-netgear-wnr854t.dtb \ orion5x-rd88f5182-nas.dtb dtb-$(CONFIG_ARCH_PRIMA2) += \ prima2-evb.dtb diff --git a/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts new file mode 100644 index 0000000..cce5091 --- /dev/null +++ b/arch/arm/boot/dts/orion5x-netgear-wnr854t.dts @@ -0,0 +1,197 @@ +/* + * Copyright (C) 2016 Jamie Lentin <jm@xxxxxxxxxxxx> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "orion5x-mv88f5181.dtsi" + +/ { + model = "Netgear WNR854-t"; + compatible = "netgear,wnr854t", "marvell,orion5x-88f5181", + "marvell,orion5x"; + + memory { + reg = <0x00000000 0x2000000>; /* 32 MB */ + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>, + <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>, + <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x800000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_reset_button>; + pinctrl-names = "default"; + + reset { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&pmx_power_led &pmx_power_led_blink &pmx_wan_led>; + pinctrl-names = "default"; + + led@0 { + label = "wnr854t:green:power"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + }; + + led@1 { + label = "wnr854t:blink:power"; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + }; + + led@2 { + label = "wnr854t:green:wan"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&devbus_bootcs { + status = "okay"; + + devbus,keep-config; + + flash@0 { + compatible = "cfi-flash"; + reg = <0 0x800000>; + bank-width = <2>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x100000>; + }; + + partition@100000 { + label = "rootfs"; + reg = <0x100000 0x660000>; + }; + + partition@760000 { + label = "uboot_env"; + reg = <0x760000 0x20000>; + }; + + partition@780000 { + label = "uboot"; + reg = <0x780000 0x80000>; + read-only; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + switch: switch@0 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + dsa,member = <0 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + label = "lan3"; + }; + + port@1 { + reg = <1>; + label = "lan4"; + }; + + port@2 { + reg = <2>; + label = "wan"; + }; + + port@3 { + reg = <3>; + label = "cpu"; + }; + + port@5 { + reg = <5>; + label = "lan1"; + }; + + port@7 { + reg = <7>; + label = "lan2"; + }; + }; + }; +}; + +ð { + status = "okay"; + + ethernet-port@0 { + /* Hardwired to DSA switch */ + speed = <1000>; + duplex = <1>; + }; +}; + +&pinctrl { + pinctrl-0 = <&pmx_pci_gpios>; + pinctrl-names = "default"; + + pmx_power_led: pmx-power-led { + marvell,pins = "mpp0"; + marvell,function = "gpio"; + }; + + pmx_reset_button: pmx-reset-button { + marvell,pins = "mpp1"; + marvell,function = "gpio"; + }; + + pmx_power_led_blink: pmx-power-led-blink { + marvell,pins = "mpp2"; + marvell,function = "gpio"; + }; + + pmx_wan_led: pmx-wan-led { + marvell,pins = "mpp3"; + marvell,function = "gpio"; + }; + + pmx_pci_gpios: pmx-pci-gpios { + marvell,pins = "mpp4"; + marvell,function = "gpio"; + }; +}; + +&uart0 { + /* Pin 1: Tx, Pin 7: Rx, Pin 8: Gnd */ + status = "okay"; +}; diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 89bb0fc..9acb37b 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -151,6 +151,12 @@ config MACH_MSS2_DT Say 'Y' here if you want your kernel to support the Maxtor Shared Storage II platform. +config MACH_WNR854T_DT + bool "Netgear WNR854T (Flattened Device Tree)" + help + Say 'Y' here if you want your kernel to support the + Netgear WNR854T platform. + config MACH_WNR854T bool "Netgear WNR854T" help diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile index 4b2502b..9dff2d3 100644 --- a/arch/arm/mach-orion5x/Makefile +++ b/arch/arm/mach-orion5x/Makefile @@ -24,3 +24,4 @@ obj-$(CONFIG_ARCH_ORION5X_DT) += board-dt.o obj-$(CONFIG_MACH_D2NET_DT) += board-d2net.o obj-$(CONFIG_MACH_MSS2_DT) += board-mss2.o obj-$(CONFIG_MACH_RD88F5182_DT) += board-rd88f5182.o +obj-$(CONFIG_MACH_WNR854T_DT) += board-wnr854t.o diff --git a/arch/arm/mach-orion5x/board-wnr854t.c b/arch/arm/mach-orion5x/board-wnr854t.c new file mode 100644 index 0000000..c506e33 --- /dev/null +++ b/arch/arm/mach-orion5x/board-wnr854t.c @@ -0,0 +1,78 @@ +/* + * Netgear WNR854T PCI setup + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/pci.h> +#include <asm/mach/pci.h> +#include "common.h" +#include "orion5x.h" + +#define WNR854T_PCI_SLOT0_OFFS 7 +#define WNR854T_PCI_SLOT0_IRQ_PIN 4 + +static void __init wnr854t_pci_preinit(void) +{ + int pin; + + /* + * Configure PCI GPIO IRQ pins + */ + pin = WNR854T_PCI_SLOT0_IRQ_PIN; + if (gpio_request(pin, "PCI Int") == 0) { + if (gpio_direction_input(pin) == 0) { + irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); + } else { + pr_err("wnr854t_pci_preinit failed to set_irq_type pin %d\n", + pin); + gpio_free(pin); + } + } else { + pr_err("wnr854t_pci_preinit failed to request gpio %d\n", pin); + } +} + +static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) +{ + int irq; + + /* + * Check for devices with hard-wired IRQs. + */ + irq = orion5x_pci_map_irq(dev, slot, pin); + if (irq != -1) + return irq; + + /* + * PCI IRQs are connected via GPIOs + */ + switch (slot - WNR854T_PCI_SLOT0_OFFS) { + case 0: + return gpio_to_irq(WNR854T_PCI_SLOT0_IRQ_PIN); + default: + return -1; + } +} + +static struct hw_pci wnr854t_pci __initdata = { + .nr_controllers = 2, + .preinit = wnr854t_pci_preinit, + .setup = orion5x_pci_sys_setup, + .scan = orion5x_pci_sys_scan_bus, + .map_irq = wnr854t_pci_map_irq, +}; + +static int __init wnr854t_pci_init(void) +{ + if (of_machine_is_compatible("netgear,wnr854t")) + pci_common_init(&wnr854t_pci); + + return 0; +} +/* NB: Use late_initcall so we can gpio_request() without being deferred */ +late_initcall(wnr854t_pci_init); -- 2.8.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
