Hi Tomasz,
I'm sorry for late reply.
On 2016년 08월 25일 23:41, Tomasz Figa wrote:
> 2016-08-25 23:30 GMT+09:00 Tomasz Figa <tomasz.figa@xxxxxxxxx>:
>>> + }
>>> +
>>> +#define EXYNOS_PIN_BANK_EINTN_EXT(pins, reg, id, pctl_idx, eint_idx) \
>>> + { \
>>> + .type = &bank_type_off, \
>>> + .pctl_offset = reg, \
>>> + .nr_pins = pins, \
>>> + .eint_type = EINT_TYPE_NONE, \
>>> + .name = id, \
>>> + .pctl_res_idx = pctl_idx, \
>>> + .eint_res_idx = eint_dix \
>>> + }
>>
>> Your patch 4/7 doesn't seem to use this one, so this is dead code for
>> the time being. Please add when there is real need for it.
>>
>> Also it doesn't really make much sense to have index for both pctl and
>> eint. Please define first entry of regs property as always pointing to
>> pctl registers and by also eint registers for usual controllers. Then
>> second regs entry would be eint registers for controllers with
>> separate register blocks. Then there is only a need to have
>> eint_res_idx in the driver and no need for pctl_res_idx, because it
>> would be always 0.
>
> Ah, sorry, I got confused again by which registers are where in these
> GPF banks. Let's make it the other way around and make DT contain eint
> registers in first regs entry and hardcode eint_res_idx to 0 for the
> time being.
I got with slight confusion.
Do you mean that you want to remove the 'eint_res_idx' because
it is always zero(0) as your comment. And do you agree to add 'pctl_res_idx'?
Also, as you commented, the eint_res_idx for both GPA and GPFx is zero(0).
Example:
pinctrl_alive: pinctrl@10580000 {
compatible = "samsung,exynos5433-pinctrl";
/* ALIVE domain , IMEM domain */
reg = <0x10580000 0x1a20>, <0x11090000 0x100>;
wakeup-interrupt-controller {
compatible = "samsung,exynos7-wakeup-eint";
interrupts = <GIC_SPI 16 0>;
};
};
GPA's eint_res_idx is 0
GPA's pctl_res_idx is 0
GPFx's eint_res_idx is 0
GPFx's pctl_res_idx is 1
However it should be still beneficial to refactor the code
> and calculate per-bank eint_base to avoid adding the offset every
> time, similarly to pctl_base/offset, from my suggestion below.
I agree. I'll modify it according to your comment.
>
>>> @@ -345,7 +346,8 @@ static void pin_to_reg_bank(struct samsung_pinctrl_drv_data *drvdata,
>>> ((b->pin_base + b->nr_pins - 1) < pin))
>>> b++;
>>>
>>> - *reg = drvdata->virt_base + b->pctl_offset;
>>> + pctl_res_idx = b->pctl_res_idx;
>>> + *reg = drvdata->virt_base[pctl_res_idx] + b->pctl_offset;
>>
>> I suggested something slightly different. Instead of
>> bank::pctl_res_idx, I proposed bank::pctl_base.
>> bank_info::pctl_res_idx would be specified only in init driver data
>> and bank::pctl_base would be calculated at probe time as
>> drvdata->virt_base[bank_info->pctl_res_idx] + bank_info->pctl_offset.
>> This would eliminate the need to do any indexing and adding further in
>> the code and make things simpler.
>>
>> Taking my other comments above, pctl part would be unchanged and only
>> eint addresses and offsets would be affected.
>
> Ah, scratch this one sentence. I got confused with the register layout
> again, sorry. Please refactor both eint and pctl as I suggested in the
> upper paragraph.
>
> Best regards,
> Tomasz
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
--
Best Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
