On Sun, Aug 28, 2016 at 06:00:05PM +0200, Hans de Goede wrote: > From: Siebren Vroegindeweij <siebren.vroegindeweij@xxxxxxxxxxx> > > This adds a driver for the Elan eKTF2127 touchscreen controller, > which speaks an i2c protocol which is distinctly different from > the already supported eKTH controllers. > > Signed-off-by: Michel Verlaan <michel.verl@xxxxxxxxx> > Signed-off-by: Siebren Vroegindeweij <siebren.vroegindeweij@xxxxxxxxxxx> > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > --- > Changes in v2: > -Improve devicetree bindings document > -Use touchscreen_parse_properties and touchscreen_report_pos instead of DIY > -Remove a bunch of unused defines (copy and paste leftover from chipone driver) > -Some other minor cleanups and review comments addressed > -Add defines for some command / address hex-values > -Check packet header in interrupt handler > --- > .../bindings/input/touchscreen/ektf2127.txt | 27 ++ Acked-by: Rob Herring <robh@xxxxxxxxxx> > drivers/input/touchscreen/Kconfig | 12 + > drivers/input/touchscreen/Makefile | 1 + > drivers/input/touchscreen/ektf2127.c | 333 +++++++++++++++++++++ > 4 files changed, 373 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ektf2127.txt > create mode 100644 drivers/input/touchscreen/ektf2127.c -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
