From: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
Added gfladj variable to control the core behavior with respect to
SOF, ITP, and frame timer functionality.
Currently there is dwc->fladj that holds a single field in GFLADJ
register (GFLADJ.GFLADJ_30MHZ). A new variable gfladj is added to
dwc structure to allow setting of the entire GFLADJ register. If
dwc->gfladj is set, then it has a higher priority than dwc->fladj
when writing to the GFLADJ register.
Synopsys HW setup (HAPS DX and phy board) requires a preset to this
register to improve interoperablitity. For example, the value for
GFLADJ_REFCLK_LPM_SEL should be set to 0 with ref_clk period of 50.
Signed-off-by: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 5 +++++
drivers/usb/dwc3/core.h | 1 +
drivers/usb/dwc3/dwc3-pci.c | 1 +
4 files changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index aa54ba7..cad4bf6 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -52,6 +52,8 @@ Optional properties:
UTMI+ and "ulpi" for ULPI when the DWC_USB3_HSPHY_INTERFACE has value 3.
- snps,ref_clk_per: value for GUTCL.RefClkPer field that sets the period of
ref_clk in nano seconds.
+ - snps,gfladj: if set, overides the value in the GFLADJ register. Takes
+ precedence over snps,quirk-frame-length-adjustment.
- snps,quirk-frame-length-adjustment: Value for GFLADJ_30MHZ field of GFLADJ
register for post-silicon frame length adjustment when the
fladj_30mhz_sdbnd signal is invalid or incorrect.
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b96bf69..dfe1b1f 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -693,6 +693,9 @@ static int dwc3_core_init(struct dwc3 *dwc)
/* Adjust Frame Length */
dwc3_frame_length_adjustment(dwc);
+ if (dwc->gfladj != 0xffffffff)
+ dwc3_writel(dwc->regs, DWC3_GFLADJ, dwc->gfladj);
+
usb_phy_set_suspend(dwc->usb2_phy, 0);
usb_phy_set_suspend(dwc->usb3_phy, 0);
ret = phy_power_on(dwc->usb2_generic_phy);
@@ -955,6 +958,7 @@ static int dwc3_probe(struct platform_device *pdev)
dwc->maximum_speed = usb_get_maximum_speed(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
+ dwc->gfladj = 0xffffffff;
dwc->has_lpm_erratum = device_property_read_bool(dev,
"snps,has-lpm-erratum");
@@ -1004,6 +1008,7 @@ static int dwc3_probe(struct platform_device *pdev)
&dwc->hsphy_interface);
device_property_read_u32(dev, "snps,quirk-frame-length-adjustment",
&dwc->fladj);
+ device_property_read_u32(dev, "snps,gfladj", &dwc->gfladj);
device_property_read_u32(dev, "snps,ref_clk_per", &dwc->ref_clk_per);
dwc->lpm_nyet_threshold = lpm_nyet_threshold;
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index ab58334..61336a9 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -878,6 +878,7 @@ struct dwc3 {
u32 ref_clk_per;
u32 fladj;
+ u32 gfladj;
u32 irq_gadget;
u32 nr_scratch;
u32 u1u2;
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index 254788b..71a52db 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -128,6 +128,7 @@ static int dwc3_pci_quirks(struct pci_dev *pdev, struct platform_device *dwc3)
PROPERTY_ENTRY_BOOL("snps,has-lpm-erratum"),
PROPERTY_ENTRY_BOOL("snps,dis_enblslpm_quirk"),
PROPERTY_ENTRY_U32("snps,ref_clk_per", 0x32),
+ PROPERTY_ENTRY_U32("snps,gfladj", 0xc800000),
{ },
};
--
2.9.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
