The pinctrl pull up/down register on exynos4210 is 2-bit wide for each pin and it accepts only values of 0, 1 and 3. The pins sd4-bus-width8 were configured with value of 4. The driver does not validate the value so this overflow effectively set a bit 1 in adjacent pins thus configuring them to pull down. The author's intention was probably to set drive strength of 4x. All other bus-widths pins are configured with pull up and drive strength of 4x. Fix this one with same pattern. Fixes: 87711d8c7c70 ("ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC") Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> --- arch/arm/boot/dts/exynos4210-pinctrl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi index 8046340e50ac..d9b6d25e4abe 100644 --- a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -649,7 +649,7 @@ sd4_bus8: sd4-bus-width8 { samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; samsung,pin-function = <EXYNOS_PIN_FUNC_3>; - samsung,pin-pud = <4>; + samsung,pin-pud = <EXYNOS_PIN_PULL_UP>; samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>; }; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html